Pushen

4-Sided type, 4-sided Film thickness is 100μm, Application width 80mm, material stainless steel.

Viscosity range 400-1800cSt; nozzle diameter 5.3mm; portable; stainless steel; meets ASTM D4212 standard.

Cube, Film thickness 20/30um, Spreader width 12.7mm, accuracy +/- 2μm/+/- 3μm, 1Cr17N2 material.

Vacuumpump power 150W, Drawdown Vacuum Plate dimensions 360x250mm, pore diameter 1mm, hole spacing 18mm, using the principle of vacuum adsorption, the substrate adsorption and then vacuum Spreader stage for Moulding.

PUSHEN QT-I film Drying Time Recorder is a high accuracy, ISO and ASTM compliant professional equipment for measuring coating drying time and ensuring surface coating mass.

380V, conforms to GB/T5211 and ISO, ASTM standards, used for laboratory determination of tinctorial strength or tinting strength of pigments or inks.

Desktop with bracket; aperture 4mm; capacity 100ml; brass material; Measurement range 112-685 cis; outflow time ≤ 150 seconds; in line with GB/T1723 standard.

Viscosity range 25~ 120cSt, outflow time 30~100s, flow hole diameter 2.53mm, capacity 100ml, cup height 87mm, cup width 55mm, cup body material cathode aluminum oxide, filter material brass, applicable standard ASTM D1200

Flow hole diameter 8mm, capacity 100ml, cup body material aluminum, filter material stainless steel, handle material aluminum, applicable to standard DIN 53211.

Viscosity range 10~35cSt, outflow time~, flow hole diameter 1.9mm, capacity 100ml, cup height 87mm, cup width 55mm, cup body material cathode aluminum oxide, filter material brass, applicable standard ASTM D1200

Hole diameter 2mm, capacity 100ml, cup body material anodic oxidation aluminum, filter material stainless steel. Comply with DIN53211 standard

Dimensions 432 × 165 × 0.25mm, Gloss (60 °) < 10 (measured value: 6 +/- 0.5), reflectance < 4% (measured value: 3 +/- 0.5), Film thickness 0.25 +/- 0.02mm, smooth matte surface, no plasticizer. In the scrub test, the coating is applied to the scrub test piece at a specific Film thickness, and after drying, it is scrubbed with PS 2730 JTX-II architectural coatings Scrub washability Testers.

Viscosity range 91~ 326cSt, outflow time 30~100s, flow hole diameter 5mm, correction factor 3.28, C value 220, cup body material anodic oxidation aluminum, filter material stainless steel, applicable standards ASTM D5125, ISO 2431.

Single-sided type, Film thickness 700 μm, Application width 160mm, stainless steel material.

Silent electric way lift, lift stroke 500mm, Rotation speed 0-1500rpm, basket bottom sieve to the special sub separated from the base, it can get the desired grinding effect in a short time.

Rotation speed 30-80 (rpm), standard container volume 1.6 L, can be used to achieve dry and wet mixing, wet and wet mixing, clean and dust-free in the production process, easy to clean.

Display mode Pointer type, Measurement range 10~100000mpa.s, Rotor specifications 1 #, 2 #, 3 #, 4 #, Rotor speed 6/12/30/60rpm, Measurement accuracy +/- 5% F.S.

Built-in soft start, automatic overload protection, Max. stirring Capacity 40L, maximum stirring viscosity 20000 mPa.s, digital display intuitive stirring Rotation speed to ensure data collection.

Silent electric way lift, lift stroke 250mm, Rotation speed 0-3000rpm, basket bottom sieve to special sub separated from the base, it can get the desired grinding effect in a short time.

Rotation speed 30-80 (rpm), standard container volume 1.6 L, can be used to achieve dry and wet mixing, wet and wet mixing, clean and dust-free in the production process, easy to clean.