YongLiDa

Viscosity range 400~1800cSt, flow hole diameter 5.28mm, capacity 44ml, Applicable standard ASTM D4212, Environmental temperature 25 +/- 0.2 ℃.

Sinking speed 0.01-0. 70mm/s, stroke length 0-12mm/s, maximum panel width 105mm, maximum panel thickness (steel) 0.8mm, maximum speed (steel panel) 0.6mm/s, maximum panel thickness (aluminum) 1.2mm, maximum speed (aluminum panel) 0.7mm/s, +/- 1% of speed accuracy setting speed, maximum sinking force 5000N, indenter width (ball) φ 20mm, mold diameter 27mm.

Direct reading type, no weight, range 40.2~ 141.0KU, Precision is +/- 1.5%, suitable for Coating, paints viscosity test.

Viscosity range 70~370cSt, flow hole diameter 4.12mm, capacity 100ml, cup body material aluminum alloy, filter material stainless steel, Applicable standard ASTM D1200.

In line with GB/T1730 and ISO1552 standards, it is specially designed for the test of film resistance to concave deformation. Its automatic counting function improves the test efficiency and is suitable for hardness testing of multi-layer coatings such as Coatings, Paints, varnishes, etc. The swing rod length is 500mm and the mass is 120g

Used to evaluate the surface reflection of coatings, the light source illuminance is not less than 1200X, and the clarity of coatings can be reflected by 13 kinds of image grades. The instrument has high accuracy test capability, suitable for measurement of samples not less than 60x60mm, providing accurate distinctness of image grades

Load 500g, applicable to standard GB/T 6739, test angle 45 °, load 1 +/- 0.05kg, three-point contact with the measured surface roller, pencil lead.

Weight 200g; bottom area 1cm2; in line with GB/T1728 standard.

Viscosity range 200~1200cSt, flow hole diameter 4.26mm, capacity 44ml, cup body material stainless steel, filter material stainless steel, handle material stainless steel, Applicable standard ASTM D4212, Environmental temperature 25 +/- 0.2 ℃, correction factor 0.95~ 1.05.

Viscosity range 600~2000cSt, outflow time 30~100s, flow hole diameter 8mm, cup body material aluminum alloy, filter material stainless steel, Applicable standards ISO 2431, GB/T 6753.4.

The groove depth is 100-200-300-400-500 μm, the material is stainless steel, and the dimensions are 120 * 20 * 20mm.

Impact height 120cm, Impact height 0~120cm, drop weight mass 1kg, 1.36kg, 2kg, Striker Diameter φ 8mm, φ 15.87mm, φ 20mm, meet the standards GB/T1723, ASTM MD2794, ASTM G14, IBCI5C139.

Set grinding, dispersion, Stir in one, motor power 400W, speed range 0~8000rpm, lifting stroke 200mm.

Range 0~500μm, material stainless steel, dimensions φ 50 * 27mm, application standard GB/T1764-79, GB/T134522-92, ISO 2808-74.

Designed according to GB/T9266 standard, it adopts soap-water circulation device, which has the characteristics of easy operation and scientific structure. It evaluates the durability of coatings by simulating abrasion and erosion in daily use, and has good repeability, which can accurately evaluate the damage resistance performance of coatings.

Outflow time 30~100s, flow hole diameter 3/4/6 mm, cup body material aluminum alloy, filter material stainless steel, Applicable standard ISO 2431-1993, GB/T 6753.4-98.

Viscosity range 34~ 135cSt, flow hole diameter 4mm, cup body material aluminum alloy, filter material stainless steel, applicable standards ISO 2431, GB/T 6753.4.

Viscosity range 34~ 135cSt, flow hole diameter 4mm, cup body material aluminum alloy, filter material stainless steel, Applicable standards ISO 2431, GB/T 6753.4.

Cup volume 37ml, material copper nickel plating, suitable for standard GB/T 6750, balanced hammer hollow structure, filled with lead particles to adjust the weight.

The size of the roller is 65x135mm, and the three rollers are squeezed against each other to destroy the bonding force between the molecules of the sample, so as to realize the grinding and uniform mixing of the sample. The speed ratio is 1:3:9, the speed of the middle roller is 88rpm, and the particle size of the starting material is 50~100μm, which is suitable for the grinding of the experimental interior paints.

Coating 1 Viscometer, flow hole diameter 5.6mm, flow hole diameter error +/- 0.2mm, capacity 50ml, cup body material aluminum, Applicable standard GB/T 1723

Coating range 100~1000μm; Dimension groove 120 * 22 * 20mm; stainless steel material; in line with ASTM/D2801, JB/T3998 standards.

By simulating the sanding process of undercoat and putty, evaluate its anti-sanding performance. With counter function, real-time display of sanding times and abrasion degree, and support for adjusting load weight. It is suitable for testing the sanding of undercoat and putty, with adjustable Rotation speed and a variety of additional weights.

Viscosity range 200~1200cSt, flow hole diameter 5.2mm, capacity 100ml, cup body material aluminum alloy, filter material stainless steel, Applicable standard ASTM D1200.

Flow hole diameter 4mm, capacity 100ml, cup body material aluminum, Applicable standard GB/T 1723, Environmental temperature 25 +/- 2 ℃, correction factor 0.97~ 1.03.

Used to test the solvent resistance of aluminum-plastic composite panels and similar substrate coatings. Visually detect whether the substrate is exposed at the scrubbing place by scrubbing the coating under specified solvents and conditions. The instrument has a wipe test stroke of 100mm and a wipe test frequency of 100cpm

Viscosity range 7~ 42cSt, flow hole diameter 3mm, cup body material aluminum alloy, filter material stainless steel, applicable standards ISO 2431, GB/T 6753.4.

Viscosity range 5~ 60cSt, flow hole diameter 2mm, capacity 44ml, cup body material stainless steel, filter material stainless steel, handle material stainless steel, Applicable standard ASTM D4212, Environmental temperature 25 +/- 0.2 ℃.

Viscosity range 49~ 220cSt, flow hole diameter 3.4mm, capacity 100ml, cup body material aluminum alloy, filter material stainless steel, Applicable standard ASTM D1200.

Viscosity range 188~ 684cSt, flow hole diameter 6mm, cup body material aluminum alloy, filter material stainless steel, Applicable standards ISO 2431, GB/T 6753.4.

Compliant with GB/T1730 and ISO1552 standards, specially designed for testing the anti-deformation resistance of films. The instrument uses stopwatch counting to ensure accurate measurement of coating hardness, suitable for hardness testing of various Coatings, Paints and varnishes. Swing rod length 500mm, mass 120g

Outflow time 0~150s, flow hole diameter 4mm, capacity 100ml, cup body material bakelite, Applicable standard GB/T 1723, Environmental temperature 25 +/- 2 ℃, correction coefficient 0.97~ 1.03.

The range is 250~700 μm, the scale is 45 μm, the material is stainless steel, and the dimensions are 65 * 43 * 1.5mm.

Viscosity range 10~35cSt, flow hole diameter 1.9mm, capacity 100ml, cup body material aluminum alloy, filter material stainless steel, Applicable standard ASTM D1200.

Range range 10~100μm, sub-scale 10μm, material stainless steel, dimensions 65 * 36 * 1.5mm.

Multi-faceted type, wet film thickness 125/150/175/200μm, application width 80mm, stainless steel material corrosion resistance, in line with GB/T 1727 standard.

Impact height 120cm, sub-scale 1cm, drop weight mass 1000g, Striker Diameter φ 8mm, Impact depth 2mm, die base aperture φ 15mm, curvature radius R2.5~ 3mm, meet the standard GB/T 1732

The probe pressure range is 50~250N, the probe pressure accuracy is +/- 10%, the diameter of the rubber probe is φ 40mm, and the rubber hardness of the probe is 60 +/- 5A.

Viscosity range 25~ 120cSt, flow hole diameter 2.53mm, capacity 100ml, cup body material aluminum alloy, filter material stainless steel, Applicable standard ASTM D1200.