jingwen

Suitable for tear resistance testing of a wide range of materials, including films, soft polyvinyl chloride (PVC), paper, nonwovens, etc., widely used in Encasement, Spinning & Weaving and Plastics industries. Instruments comply with several international standards (e.g. ISO 1974, ASTM D1922) and offer a variety of test capacities (200gf to 6400gf)

Measurement range 10~ 1000mN, tear initial angle 27.5 ° +/- 0.5 °, in line with GB455.1 and ISO1974 standards.

Force value range 100N, force value range 2~ 100% FS, force value resolution 0.01N, force value Precision +/- 1%, tensile speed 0.05~ 500mm/min, beam displacement 0.001mm, tensile space 400mm

Complies with ISO 535-1991 and GB/T1540-2002 standards. The instrument provides accurate water-absorption energy data by measuring the mass increase of the liquid absorbed by the paper. It is compact and equipped with a 200mm press roller, with quality control in the range of 10 +/- 0.5kg

Designed for bursting strength detection of paper and non-paper sheet materials, mechatronics structure, high automation, using high-speed ARM processor and high-accuracy Sensors to ensure automatic measurement and intelligent judgment, combined with touch screen and thermal printer

Heat sealing temperature RT +~ 300 ℃, temperature control accuracy +/- 0.2 ℃, heat sealing time 0.1~ 999.9s, heat sealing pressure 0.05~ 0.7MPa, heat sealing knife 50 * 10mm on heat sealing area (five)

Equipped with 7-inch touch screen, with high-accuracy weighing Sensors and high-speed PLC processor, support display pressure and time test Linear dispersion, automatic data processing and output statistical results, automatic measurement and intelligent judgment. Built-in thermal printer can be connected to a computer or U disk for data download.

Designed and manufactured according to the relevant provisions of GB/T 15171-94 Soft Encasement sealing performance test method, vacuum degree -90~ 0kPa, vacuum accuracy level 1, vacuum holding time 0-9999 seconds

Integrated tensile, disbonding, tearing, heat sealing, extension tensile, pressure down, ring initial adhesion and other professional independent test procedures, force value range 500N, force value range 2~ 100% FS, force value resolution 0.01N, force value Precision +/- 1%

Room temperature~ 260 ℃, heat sealing pressure 0~ 0.7Mpa, control system digitalization display, fully automated equipment, high temperature control accuracy, anti-scalding design and leakage protection design, double cylinder design.

Special sampling tool for edge pressure test of corrugated fibreboard, used with JW101 compression tester. The instrument has simple structure and high accuracy, and can accurately cut 3-layer, 5-layer and 7-layer Cardboard to ensure that the sample meets the requirements of GB6543 and GB6548 standards

Measurement range 0.03-200 N, accuracy 0.5, 5 inch high definition touch screen, for measuring film heat seal strength and adhesive tape 180 degree peel strength.

Heat sealing temperature RT +~ 300 ℃, temperature control accuracy +/- 0.2 ℃, display resolution 0.1 ℃, heat sealing knife material brass, heat insulation layer temperature resistance within 500 ℃ (double-decked insulation)

Compliant with GB/T 26203 and TAPPI T-569 standards, using electro-hydraulic pressure, high test accuracy (+/- 1 J/m ²), touch screen display, support RS232/USB communication output, and equipped with high-speed silent thermal printer

Force value range 100N, force value range 2~ 100% FS, force value resolution 0.01N, force value Precision +/- 1%, tensile speed 0.05~ 500mm/min, beam displacement 0.001mm, tensile space 800mm

Vacuum degree -90~ 0kPa (can be set, factory is -70Kpa), vacuum accuracy level 1, vacuum holding time 0-9999 seconds, Display resolution 1 second (can be set, factory is 30 seconds), effective size of vacuum chamber φ 270 * 160mm

Heat sealing temperature RT +~ 230 ℃, temperature control accuracy +/- 0.2 ℃, Display resolution 0.1 ℃, heat sealing knife material aluminum alloy, heat insulation layer temperature resistance within 250 ℃ (double-decked insulation)

、

Measurement range 0.02-100 N, accuracy 0.5, 7 inch high definition touch screen, implementation of ISO1924, GB/T12914 standards, designed for measuring the tensile performance of paper and sheet materials.

Paper Strength, Plastic film, Composite film, Adhesive, Adhesive tape, Patch, Protective film, Release paper, Rubber, Artificial leather, paper fiber, etc. Tensile, disbonding, tearing, heat sealing, fixed extension tensile, pressure, ring initial adhesion test

Heat sealing temperature RT +~ 300 ℃, temperature control accuracy +/- 0.2 ℃, Display resolution 0.1 ℃, heat sealing knife material brass, heat insulation layer temperature resistance within 500 ℃ (double-decked insulation)

Heat sealing temperature RT +~ 230 ℃, temperature control accuracy +/- 1 ℃, display resolution 1 ℃, heat sealing knife material aluminum alloy, heat insulation layer temperature resistance within 250 ℃ (double-decked insulation)

Compliant with ISO 5626 and other standards, suitable for film thickness less than 1mm paper, Cardboard flexural strength test. With automatic measurement, data statistics, printing and storage functions, each group can save 10 data and calculate the average.

It is suitable for paper quantitative determination and sampling of standard samples of thin-slice burst resistance experiment, in line with QB/T 1671-98 standard. Simple pressure bar operation is used, the sampling area is 100cm ², and the error is controlled at +/- 0.35cm ², which is suitable for the range of 0.1~ 1.2mm Film thickness.

Measurement range 10-5000mN, touch screen operation, real-time display of various data, low noise, in line with GB/T8942 standard, with softness test accessories.

LED light source and LCD liquid crystal display, the measurement range is 0 to 199, the minimum indication is 0.1, the repeability is 0.2, the error of indication does not exceed +/- 1. The instrument conforms to GB/T3978 and other national standards

With accurate sampling ability, the sampling error is controlled between +/- 0.10mm~ +/- 0.50mm, and the notch parallelism is less than or equal to 0.05mm. It is suitable for materials with sampling Film thickness less than 3.0mm.

Designed for measuring the interlayer strength (Z-direction tensile strength) of test paper and Cardboard, it is automatically operated by electro-hydraulic pressurization device, with accurate force measurement and high-resolution display. Support RS232/USB communication output, convenient data management and analysis.

Measurement accuracy 0.001N, no mechanical knob, full digitalization system, PVC control panel and LCD, equipped with micro printer, Organic Glass countertop.

Compliant with GB/T 26203 and TAPPI T-569 standards, using electro-hydraulic pressure, high test accuracy (+/- 1 J/m ²), touch screen display, support RS232/USB communication output, and equipped with high-speed silent thermal printer

Integrated tensile, disbonding, tearing, heat sealing, tensile resistance, pressing down, annular initial adhesion and other test procedures, force value range 500N, force value range 2~ 100% FS, force value resolution 0.01N, force value Precision +/- 1%, tensile speed 0.05~ 500mm/min, beam displacement 0.001mm, tensile space 800mm

In line with GB/T 12914 and other standards, it is suitable for tensile force and elongation detection of paper, Plastic film, chemical fiber filament and other sheet materials. With high accuracy sampling ability, the parallelism of the incision is less than or equal to 0.1mm, and the sampling error is controlled within the range of +/- 0.10mm~ +/- 0.50mm.

Measurement range 150~ 5600kpa (Cardboard) 50~ 1400kpa (paper), accuracy ≤ +/- 0.5%, resolution 0.1kpa, deformation error ≤ 1mm, in line with ISO 2758, GB 454 and other international standards, widely used in scientific research, papermaking, Encasement and Quality control industries.

Optical, mechanical and electrical integrated design, microcomputer measurement and control technology, compact structure, beautiful appearance, easy maintenance. The instrument is mainly used for the measurement of paper, Cardboard, Pulp, Spinning & weaving products, Plastic, Ceramics and other materials whiteness, and can also measure the opacity of thin sheet materials and other Optical Properties.

Adopt ball screw drive and high-end stepper motor, equipped with large screen touch display, real-time display of test data, and support printing tensile strength, elongation and other results. Built-in micro-printer, with automatic reset, data memory and overload protection functions.

6 stations can simultaneously carry out multiple test items, standard pressure roller 2000g +/- 50 g, weight 1000 +/- 1g (optional 200g), suitable for various adhesive products holding tack test, in line with the standard GB/T4851-2014 A method.

Designed for corrugated fibreboard and Miscellaneous Film thickness determination, measurement accuracy of 0.01mm, using 20 +/- 0.5kPa contact pressure to ensure stable measurement results. The instrument meets ISO 3034 and GB/T 6547 standards

Pneumatic fixture design, no need to manually clamp the sample, 3.2 inch LCD screen real-time display data, and built-in thermal printer for easy data output. Wide measurement range, resolution up to 0.1mN, error of indication does not exceed +/- 1.0%

Comply with ISO, GB and other international standards. With automatic and manual measurement mode, real-time display of large value, small value, average value and other data, configuration of standard block calibration system, and provide automatic statistics, printing and other functions