TaiChang Instrument

Imported Vacuum Pump oil-free operation, with large and small volume cavity automatic switching function, test range 0~9999s, Precision 0.1 seconds, micro printer can save data.

Comply with ISO5263 standard, suitable for wet dissociation pulp, container inner diameter × height φ152 × 191mm, Stirrer blade diameter φ90mm.

Simultaneous detection of dynamic and static coefficient of friction, microcomputer control, built-in micro printer, slider size 63x63mm, table size 130x440mm, accuracy level 1.

LCD display, side pressure, flat pressure, ring pressure, gluing four kinds of strength test, automatic measurement, intelligent judgment of experimental results, Precision < 1%.

Stroke 1000mm, touch key Operation mode, using CHINA Sensors, Tester level 1, test force accuracy is better than +/- 1%, test force 1000N.

Automatic control beating time, volume 23L, slurry amount 200g~ 700g, meet ISO 5264/I, TAPPI-T200 and GB7980 standards.

Touch LCD, adopt high-precision system, with digital display of test force, which can realize the adjustment of the speed of the beam when the sample is clamped. The test force Precision is better than +/- 1%, and the test stroke is 600mm.

Sampling area 100mm ², sampling Film thickness (0.1~ 1.2) mm, for paper, Cardboard gram weight measurement.

Stroke 600mm, touch key Operation mode, using CHINA Sensors, Tester level 1, test force Precision is better than +/- 1%, test force 1000N.

Touch LCD, using high-precision system, with digital display of test force, can realize the adjustment of the speed of the beam when the sample is clamped, the test force accuracy is better than +/- 1%, and the test stroke is 1000mm.

The measurement of diluted pulp suspended water rate was carried out by Schopperr-Riegler test method, with a range of 1~ 100SR, which conforms to ISO, GB/T, QB/T standards.

Wet dissociation pulp, the inner diameter of the container is φ 152 × 191mm, and the loading volume is less than or equal to 3L, which meets the IS05263 "Pulp Laboratory Wet Dissociation" standard.

Stroke 600mm, touch key Operation mode, with test force digital display, test machine level 1, test force Precision is better than +/- 1%, test force 1000N.

Comply with GB/T 26203 standard, Impact angle of 90 °, and test 5 groups of test pieces at the same time for the peeling strength of the paper layer of Cardboard.

Fully automatic test, can count and print test results, folding head stitching specification 1mm, measurement range 1 times~ 99999 times, in line with GB and QB standards.

Fully automatic test, can count and print test results, folding head stitching specification 0.75mm, measurement range 1 time~ 99999 times, in line with GB and QB standards.

Stroke 1000mm, touch key Operation mode, with test force digital display, test machine level 1, test force accuracy is better than +/- 1%, test force 1000N.

Adopting international standard design, papermaking diameter φ 300, equipped with manual pulp board pulp function, can be attached to vacuum papermaking, convenient and accurate operation.

LCD display, automatic measurement sample, with printing function, pneumatic clamping sample, Precision < 0.5%, oil feeding speed 170 +/- 15ml/min.

Fully automatic test, can count and print test results, folding head stitching specification 0.5mm, measurement range 1 time~ 99999 times, in line with GB and QB standards.

Fully automatic test, can count and print test results, used to measure paper with film thickness below 1.25mm, Measurement range 1 time~ 99999 times, in line with GB and QB standards.