TRUIT

Area: China

Level: Manufacturer authorization

Certificate Contact

TRUITProduct

$ 184.00

TRUIT TR 5508/100 Stainless Steel Wet Film Wheel Range 0~100μm SE
0 ~ 100µm5μm

Thickness range 0~100μm, Graduation 5μm, wear-resistant stainless steel material, in line with GB, ASTM, ISO standards.

Compare
specification
$ 304.00

TRUIT TR 3101/200 adjustable drawdown blade Coating Applicator film width 200mm SE
0~4500μm200mm

Film width 200mm, film thickness 0-4500μm, alloy steel drawdown blade, high accuracy, wear resistance and corrosion resistance, magnetic suction drawdown blade, easy to clean.

Compare
specification
$ 184.00

TRUIT TR 5508/50 Wet film instrument thickness measuring wheel, range 0~50μm SE
0 ~ 50µm2μm

Thickness range 0~50μm, Graduation 2μm, stainless steel material, in line with GB, ASTM, ISO standards.

Compare
specification
$ 133.00

TRUIT TR 5006A Multifunctional cross-cut board cross-cut 7, 11 SE
7、111、1.5、2、3mm

Cross-cut length 35mm, cross-cut number 7, 11, cross-cut spacing 1, 1.5, 2, 3mm, 304 stainless steel, with 600 type tape and nylon brush.

Compare
specification
$ 145.00

TRUIT TR 1010/2 Portable Coat - 4 cups, Coat 4 Viscometer SE
4mmGB/T 1723

Portable, brass material, capacity 100 +/- 1ml, inner diameter φ49.5 +/- 0.2mm, in line with GB/T 1723 standard.

Compare
specification
$ 99.00

TRUIT TR 5501/100 Wet Film Comb Gauge 10~100μm SE
10μm10~100μm

1 working face, range 10~100μm, Graduation 10μm, corrosion resistant stainless steel, in line with GB/T 13452, ASTM D4414, ISO2808 standards

Compare
specification
$ 114.00

TRUIT TR 5506/3000 Wet Film Wheel Comb 25~ 3000μm SE
25~3000μm25~200μm

Six working faces, range 25~ 3000μm, Graduation 25~ 200μm, corrosion resistant stainless steel, in line with GB/T 13452, ASTM D4414, ISO2808 standards

Compare
specification
$ 436.00

TRUIT TR 5214 Bending Tester SE
Compliant with GB/T 11185, ASTM D522 and ISO6860-84 standards, high-quality stainless steel conical mandrel with corresponding scale values for easy reading.

Compare
specification
$ 111.00

CHINA TR 1001/3 Zahn Cup No. 3 Portable Viscosity Cup 3.76mm SE
3.76mm20~80s

The diameter of the flow hole is Φ3.76mm, the outflow time is 20~80s, and the viscosity range is 100~800cSt.

Compare
specification
$ 794.00

TRUIT TR 5301/A Alcohol Rubber Wear Tester, Wear Tester, Touch Screen, Double Station SE
7-Inch touch screen, dual-station design, 0-50mm adjustable round trip, test load 80~990g, suitable for Glass cover, film, plastic, leather and Spinning & weaving abrasion resistance.

Compare
specification
$ 111.00

CHINA TR 1001/2 Zahn Cup No. 2 Portable Viscosity Cup 2mm SE
2.74mm20~80s

The diameter of the flow hole is Φ2.74, the outflow time is 20~80s, and the viscosity range is 20~250cSt.

Compare
specification
$ 138.00

TRUIT TR 3001/100/60 Applicator 60μm SE
60µm100mm

Single-sided Moulding, wet film thickness 60μm, made of wear-resistant and corrosion-resistant alloy steel, effective Spreader width 100mm, support non-standard customization.

Compare
specification
$ 130.00

TRUIT TR 1006/6 Handle type DIN Viscosity Cup φ6.0mm SE
f6.0mm25 to 150 seconds

Handle type, in line with DIN 53211 standard, φ6.0mm aperture, viscosity range 550~1500cst, made of aluminum alloy.

Compare
specification
$ 125.00

TRUIT TR 1002/4 Ford Viscosity Cup outflow aperture φ4.12mm SE
20～105sec

In line with ASTM standards, the outflow aperture is φ4.12mm, the measurement viscosity range is 70~370cst, the filter is made of high-quality stainless steel, and the volume is 100ml.

Compare
specification
$ 209.00

TRUIT TR 3004/160/4 4-sided Film Applicator 25/50/75/100μm SE
25µm 、 50µm 、 75µm 、 100µm160mm

The film thickness is 25, 50, 75, 100 μm, the Application width is 160mm, and it is made of wear-resistant and corrosion-resistant alloy steel.

Compare
specification
$ 183.00

TRUIT TR 3004/80/4 Wet Film Applicator 25/50/75/100μm SE
25µm 、 50µm 、 75µm 、 100µm80mm

4-Sided Applicator, wet film thickness of 25, 50, 75, 100μm, Application width of 80mm, using high-quality wear-resistant corrosion-resistant alloy steel.

Compare
specification
$ 242.00

TRUIT TR 3101/100 adjustable Coating Applicator film width 100mm SE
0~4500μm100mm

Film width 100mm, film thickness 0-4500μm, alloy steel drawdown blade, high accuracy, wear resistance and corrosion resistance, magnetic suction drawdown blade, easy to clean.

Compare
specification
$ 111.00

CHINA TR 1001/1 Zahn Cup No. 1 Portable Viscosity Cup 2mm SE
2mm35~80s

Flow hole diameter Φ2.00, flow time 35~ 80s, viscosity range 5~ 60cSt, for thinner products.

Compare
specification
$ 281.00

TRUIT TR 3101/150 Adjustable Film Applicator film width 150mm SE
0~4500μm150mm

Film width 150mm, film thickness 0-4500μm, alloy steel drawdown blade, high accuracy, wear resistance and corrosion resistance, magnetic suction drawdown blade, easy to clean.

Compare
specification
$ 145.00

TRUIT TR 5001/4 Single Sided Cross Hatch Cutter 2mm/6 Tooth SE
6 teeth2mmFilm thickness 61μm~ 120μm hard substrate or thickness < 120μm soft substrate (wood, plastic)

Wooden handle, alloy steel blade material, suitable for laboratories and construction sites, with a knife spacing of 2mm, a number of teeth 6, and a single working face.

Compare
specification
$ 145.00

TRUIT TR 5001/1 adhesion Cross Hatch Cutter 1mm/6 teeth SE
6 teeth1mmHard substrates (metal) with film thickness < 60 μm

Wooden handle, alloy steel blade material, suitable for laboratories and construction sites, knife pitch 1mm, number of teeth 6, single working face.

Compare
specification
$ 145.00

TRUIT TR 5001/5 Single Face Cross Hatch Cutter 3mm/6 Teeth SE
6 teeth3mmHard substrate or soft substrate with film thickness 121μm~ 250μm

Wooden handle, alloy steel blade material, suitable for laboratories and construction sites, with a knife spacing of 3mm, a number of teeth 6, and a single working face.

Compare
specification
$ 145.00

TRUIT TR 5001/2 Cross-cut adhesion instrument 1mm/11 teeth SE
11 teeth1mmHard substrates (metal) with film thickness < 60 μm

Wooden handle, alloy steel blade material, suitable for laboratories and construction sites, with 1mm knife spacing, 11 teeth, and a single working face.

Compare
specification
$ 145.00

TRUIT TR 5001/3 Single top coat Cross Hatch Cutter 1.5mm/11 teeth SE
11 teeth1.5mmFilm thickness 61μm~ 120μm hard substrate or thickness < 120μm soft substrate (wood, plastic)

Wooden handle, alloy steel blade material, suitable for laboratories and construction sites, with a knife spacing of 1.5mm, 11 teeth, and a single working face.

Compare
specification
$ 172.00

TR 3080/2 Levelling Applicator 250/500/1000/2000/4000μm SE
Compliant with ASTM 2801 standard, wet film thickness 250/500/1000/2000/4000 μm, made of wear-resistant and corrosion-resistant alloy steel.

Compare
specification
$ 172.00

TR 3080/1 Coating Levelling Applicator 100/200/300/500/1000μm SE
Compliant with ASTM 2801 standard, wet film thickness 100/200/300/500/1000 μm, made of wear-resistant and corrosion-resistant alloy steel.

Compare
specification
$ 879.00

TRUIT TR 5220 T Bending Testing Machine SE
In line with GB/T12754 standard, the first bending angle is < 45 °, the thickness of the test sample: 0.5~ 1.0mm, and the stroke of the flattening mechanism is ≥ 10mm.

Compare
specification
$ 161.00

TRUIT TR 1010/2 Paint-4 cups, desktop four cups SE
4mmGB/T 1723

Copper cup + bracket, capacity 100 +/- 1ml, inner diameter φ49.5 +/- 0.2mm, in line with GB/T 1723 standard.

Compare
specification
$ 141.00

TRUIT TR 3060/4 Sag Applicator SE
650-675-700-725-750-775-800-825-850-875 （ μm ）

Film thickness 650/675/700/725/750/775/800/825/850/875 μm, wear-resistant and corrosion-resistant alloy steel material, in line with GB/T 9264, ASTM D 3730 standards.

Compare
specification
$ 96.00

TRUIT TR 1009 Iwata Cup NK-2 Cup, Copper Nickel Plated Material SE
3.5mm20~100 seconds

Copper nickel plating material, in line with JIS standard, volume 50ml, suitable for Coating industry viscosity test, measurement range 70cst~ 370cst.

Compare
specification
$ 125.00

TRUIT TR 3005/12/1 Cube Applicator 38/76μm SE
38µm / 76µm12.7mm

Film thickness 38/76μm, wear-resistant corrosion-resistant alloy steel, Application width 12.7mm.

Compare
specification
$ 111.00

CHINA TR 1001/4 Zahn Cup No. 4 Portable Viscosity Cup 4.26mm SE
4.26mm20~80s

The diameter of the flow hole is Φ4.26, the outflow time is 20~80s, and the viscosity range is 200~1200cSt.

Compare
specification
$ 130.00

TRUIT TR 1006/2 Portable DIN Cup φ2.0mm SE
25 to 150 seconds

Handle type, in line with DIN 53211 standard, φ2.0mm aperture, viscosity range 15~ 30cst, made of aluminum alloy.

Compare
specification
$ 130.00

TRUIT TR 1006/4 Portable DIN Viscosity Cup φ4.0mm SE
F4.0mm25 to 150 seconds

Handle type, in line with DIN 53211 standard, φ4.0mm aperture, viscosity range 112~ 685cst, made of aluminum alloy.

Compare
specification
$ 145.00

TRUIT TR 5006/1 coating cross-cut plate cross-cut number 11 SE
111mm

Using 304 stainless steel, cross-cut length 35mm, cross-cut number 11, cross-cut spacing 1mm, with 600 type tape and nylon brush.

Compare
specification
$ 145.00

TRUIT TR 5006/2 adhesion cross-cut plate cross-cut number 11 SE
112mm

Using 304 stainless steel, cross-cut length 35mm, cross-cut number 11, cross-cut spacing 2mm, with 600 type tape and nylon brush.

Compare
specification
$ 183.00

TRUIT TR 3004/80/6 4-sided Film Applicator 50/75/100/150μm SE
50µm 、 75µm 、 100µm 、 150µm80mm

4-Sided Applicator, wet film thickness of 50, 75, 100, 150 μm, Application width of 80mm, using high-quality wear-resistant corrosion-resistant alloy steel.

Compare
specification
$ 209.00

TRUIT TR 3004/160/2 Quad Wet Film Applicator 10/20/30/40μm SE
10μ m 、 20μ m 、 30μ m 、 40μ m160mm

Film thickness 10, 20, 30, 40 μm, Application width 160mm, wear-resistant corrosion-resistant alloy steel.

Compare
specification
$ 209.00

TRUIT TR 3004/160/9 4-sided Applicator 100/200/300/400μm SE
100µm 、 200µm 、 300µm 、 400µm160mm

The film thickness is 100, 200, 300, 400 μm, the Application width is 160mm, and it is made of wear-resistant and corrosion-resistant alloy steel.

Compare
specification
$ 145.00

TRUIT TR 5006/1.5 adhesion cross-cut plate cross-cut number 11 SE
111.5mm

Using 304 stainless steel, cross-cut length 35mm, cross-cut number 11, cross-cut spacing 1.5mm, with 600 type tape and nylon brush.

Compare
specification

下一页

品牌介绍

TRUIT, specializing in the development and manufacture of coatings, inks, painting testing instruments and related consumables, strictly follows ISO, ASTM, DIN, BS, JIS, GB and other relevant standards, and its products are widely used in coating companies, testing institutions, and related research institutions in universities/research institutes.

NBchao is an authorized self-operated mall of Tengrui, welcome to buy its testing equipment.

Menu Category Contact