The measurement procedure of color difference meter in metal parts

The application of Colorimeter in the color difference detection of metal parts is mainly used to detect the color difference after spraying on the surface of metal parts, so as to ensure the appearance quality of the product. The following are the measurement steps of the Colorimeter in detecting the pink color difference of metal parts:

1. Prepare samples: Take samples with the same material, size, and surface treatment as those used in production, and the surface of the sample should be clean.

2. Turn on the Colorimeter and preheat: Turn on the Colorimeter and let it warm up for 10-15 minutes.

3. Calibrate the white reference plate: Before measurement, you need to use the white reference plate to calibrate the Colorimeter.

4. Measure the sample: Place the sample in the measuring port of the Colorimeter and observe the measurement results on the display. Choose the measurement method according to the actual situation, such as full wavelength, CIE Lab, etc.

5. Analysis results: Analyze the color difference of the sample based on the measurement results, and compare it with the standard color plate to determine whether it meets the requirements.

6. Record data: Record the measurement results, including sample number, measurement time, measurement value and other information to facilitate subsequent data analysis and comparison.

In short, using a Colorimeter can quickly and accurately measure the color difference of samples in the pink color difference detection of metal parts, providing reliable data support for production.