FAQ and its solution for high temperature Drying Oven

The high temperature Drying Oven is a kind of equipment used for drying, curing, drying and other operations of materials under high temperature conditions. It usually has a higher maximum working temperature and a high-power heating system, which can quickly transfer heat to the surface of the material to achieve rapid and effective drying and processing under high temperature conditions.

common problem

1. Temperature control is unstable.

2. The temperature is too high or too low.

3. Uneven heating.

4. Overload or overheat protection triggers.

5. Too much noise.

Solution

1. Unstable temperature control treatment: Check the working status of the temperature controller and the position of the sensor, and find out whether the controller or sensor is faulty or needs to be replaced. The problem can be solved by replacing or repairing related parts, or readjusting the temperature control parameters.

2. Overheating or overheating treatment: Check whether the heating power of the equipment meets the requirements, and check whether there is a heating element failure or parts that need to be replaced. According to actual needs, parameters such as heating power and temperature of the equipment can be adjusted, or components such as heating elements can be replaced.

3. Uneven heating treatment: check the working status and position of the heater, and check whether the position and heating time of the heater need to be readjusted so that the items in the equipment can be heated evenly.

4. Overload or overheat protection trigger processing: Check whether the power supply voltage and ground wire of the equipment are normal, and find out whether the heater or blower is faulty or needs to be replaced. The problem can be solved by replacing or repairing related parts, or repositioning the equipment.

5. Excessive noise treatment: If the equipment is too noisy, check whether the power supply voltage and ground wire of the equipment are normal, and find out whether the heater or blower is faulty or needs to be replaced. The problem can be solved by replacing or repairing related parts, or repositioning the equipment.

North and South Chao reminds you: the high temperature Drying Oven needs to be calibrated and maintained regularly. At the same time, it is necessary to regularly clean the interior of the equipment, check the performance and condition of heaters, controllers, sensors and other equipment, and replace or repair problematic parts in time. In addition, it is recommended to carry out maintenance according to the operation manual of the equipment and the maintenance instructions provided by the manufacturer to ensure the long-term stable operation of the equipment.

Precautions

In the process of using a high temperature Drying Oven, the following points should also be paid attention to:

1. Reasonably arrange the placement of samples to ensure that the samples can be heated and distributed evenly.

2. Do not accumulate excessive debris or samples inside the device,

Avoid affecting the operation of the equipment and the accuracy of the data. 3. Before using the equipment, it is necessary to carry out preheating treatment to ensure that the equipment can reach the required temperature.

4. According to actual needs, reasonably select the heating power and precision of the high-temperature Drying Oven to avoid inaccurate test data due to mismatching equipment parameters.

5. During the use of the equipment, the heating changes and test data are recorded in time, and analyzed and processed as needed.

In short, the high-temperature Drying Oven is a commonly used drying equipment, and it is necessary to pay attention to the use and maintenance of the equipment during use to ensure the stability of the equipment and the accuracy of the test data. At the same time, it is necessary to follow the manufacturer's instructions and maintenance instructions, and perform regular maintenance to ensure the long-term reliable operation of the equipment.