How to maintain the Humidity Chamber when not in use?

When the constant temperature and humidity Test Chamber is not in use, the following measures should be taken for maintenance:

1. Clean the box: Use a clean wet wipe or paper towel to wipe the inside and outside of the box, especially the sealing rubber pad of the door and the heater, to ensure that the box is dry and clean.

2. Turn off the power: When the test box is not in use, the power of the test box should be turned off to avoid wasting energy and prolong the life of the equipment.

3. Periodic Calibration: To ensure the temperature and humidity accuracy of the Test Chamber, regular calibration is required. When the test box is not in use, the temperature and humidity sensor of the test box can be regularly sent to the relevant manufacturer or third-party laboratory for calibration.

4. Keep ventilation: When the test box is not in use, you can open the door of the test box and keep it ventilated to reduce the retention of humid air in the box.

5. Regular inspection: When the test box is not in use, the state of the box should be checked regularly, including whether the sealing rubber pad is aging, whether the heater is damaged, etc., to ensure that the equipment can work normally when it is used next time.

The above are some basic methods for maintaining the constant temperature and humidity Test Chamber. If the frequency of use is low, you should also pay attention to preheating the chamber before use to ensure the performance and accuracy of the equipment.