Back
Knowledge

High Speed Disperser Oil Change Tutorial Steps

Abstract: 这篇文章详细介绍了高速分散机的换油步骤。首先,需关闭分散机电源并准备好工具。接着,打开底部的排油阀,排出旧油,并确保完全排出。然后,使用适当的清洗剂清洁分散机内部部件,如研磨盘和容器。添加新油时,根据设备规格选择合适的油,并加入到油箱或指定位置。最后,关闭排油阀,重新连接电源,启动分散机并调整参数。操作过程中需遵守安全规程,并参考使用手册或制造商指导。

高速分散机换油教程步骤配图1

The following are the general steps for changing the oil of a high-speed disperser:


1. Preparations:


Power off the high-speed disperser and disconnect the power connection.


Ensure that the working environment of the disperser is clean and the necessary tools and equipment are ready.


2. Discharge old oil:


Open the drain valve at the bottom of the disperser to drain the old oil. Containers can be used to receive the discharged oil.


Try to drain the old oil completely to ensure that the old oil in the system is completely removed.


3. Cleaning and dispersing machine parts:


Use a suitable solvent or cleaning agent to clean the various components inside the disperser, such as grinding discs, grinding beads and containers.


Use a brush or soft cloth to clean hard-to-reach areas and make sure dirt and sediment are thoroughly removed.


4. Add new oil:


According to the specifications and requirements of the disperser, select the appropriate new oil.


Use the appropriate tool to add new oil to the disperser's tank or designated location.


According to the production requirements, determine the amount of oil required and follow the manufacturer's recommendations.


5. Start the disperser:


Close the drain valve and make sure all connections are tight.


Connect the power supply of the disperser and turn on the power switch.


Start the disperser and adjust the speed and other parameters as needed.


Precautions:

During operation, ensure that safe operating procedures are followed and appropriate personal protective equipment is worn.


Depending on the size and usage of the disperser, more frequent oil changes and cleaning may be required.


Before changing the oil, it is best to refer to the disperser's manual or consult the manufacturer to ensure that the correct steps are followed.


Please note that specific oil change tutorials may vary by disperser model and manufacturer. Therefore, always refer to the appropriate disperser user manual and follow the manufacturer's guidance and recommendations before doing anything.


Relevant knowledge
Guess you like it