Back
Knowledge

Holiday Detector Coating thickness and reference voltage comparison table

Abstract: 本文提供了电火花检漏仪防腐材料涂层厚度与参考电压的对照表。表中详细列出了不同防腐材料(如环氧煤沥青、石油沥青、聚乙烯胶带、搪玻璃等)的涂层厚度与对应的检测电压。此外,还列出了涂层厚度(从50 μm到1000 μm)与参考电压(从0.7 KV到30.1 KV)的对应关系。这些数据可用于根据具体材料的绝缘性能和设计要求,选择适当的检测电压进行电火花检漏测试。

Detection voltage schedule

Anticorrosive materialsThickness of the anti-corrosion layer
(mm)
Detect voltage
(KV)
remark
Epoxy Coal Leaching Book0.24~5KV or customizedIf there is a standard, it should be implemented according to the standard
0.4
0.6
0.8
Petroleum asphalt211
315
5.518
720
924
Polyethylene tapeConverted according to: 3249TC-V formula
V: Voltage TC: Thickness of anti-corrosion layer
According to SY4014-92 acceptance specification standard
Glass-linedAccording to experience, the detection voltage is generally 8KV~20KV
Other anticorrosive materialsDepending on the design of the design department, the voltage or the insulation properties of the material itself are tested.

Coating thickness vs. reference voltage comparison table

Coating thickness
(μm)
Reference voltage
(KV)
Coating thickness
(μm)
Reference voltage
(KV)
500.712505.5
100115006.3
1501.220008
2001.525009.6
2501.7300011.1
30020350012.6
3502.2400014.1
4002.4500017.1
5002.9600020.1
6003.3800025.7
80041000030.1
10004.7* The above is for reference only


Products required
Relevant knowledge
Guess you like it