Modern environment pneumatic hand Stirrer operating instructions

1. Purpose:

This machine is suitable for blending and stirring various paints, pulp, dyes, paints and emulsions, which can improve labor efficiency, reduce labor intensity and improve working conditions. Because this machine uses compressed air as the power source, it is suitable for mixing volatile and flammable paint or coating, and it is also suitable for use in explosion-proof workshops.

2. Basic parameters:

1. Stirring blade diameter: 150mm

2. Power: ≥0.5kw

3. No-load speed: ≤1800r/min

4. No-load air consumption: ≤22L/s

5. Working air pressure: 0.63MPa

6. Inner diameter of trachea: 13mm

7. Weight: 4kg

3. Use:

Insert the air pipe into the connecting pipe of the machine, connect the air source and use it.

4. Matters needing attention:

1. The compressed air used is kept at 0.63MPa and purified. If the air pressure is too high, the wear will increase and the life will be affected; if the air pressure is too low, the efficiency will decrease.

2. Three major parts, filter, pressure regulating valve and lubricator, should be installed in the air circuit. In the absence of these three major parts, lubricating oil should be injected from the air inlet every 2 to 3 hours. Use No. 20 engine oil in summer and No. 10 engine oil in winter.

3. Before connecting the machine to the gas circuit, the gas circuit should be opened to discharge the stolen goods in the gas circuit.

4. Pay attention to the care of the equipment during work, and do not throw it at will to avoid damage to the parts.