What types of testing instruments are involved in the detection of paint ink viscosity? The details are organized as follows:
Suitable for viscosity measurement on the construction site, the applicable viscosity range is 20-1200mm²/s
Suitable for fluids with a viscosity in the range of 20-1200cst and an outflow time of 20-100s
Suitable for Newtonian or near-Newtonian fluids, kinematic viscosity range 7-685mm²/s
Measure non-Newtonian high-viscosity fluids and viscous paints, latex paints, etc., as absolute viscosity. Architectural coatings recommend a Stormer viscometer.
It is also suitable for measuring paint semi-finished products and other related products with similar viscosity.
JIS standard cup, viscosity range 70-370cst, outflow time 20-100s
It is suitable for the viscosity measurement in the range of centistoke 96-683 cSt and the outflow time is about 20-150s
For rapid viscosity and consistency evaluation of Newtonian or near-Newtonian products.
Use the flow velocity of air bubbles in the liquid to measure the viscosity, suitable for the measurement of the viscosity of transparent liquids.
It is used to determine the transparent liquid paint with high viscosity, which is the conditional viscosity
Measure the spreading radius of the sample at times t of 10 s, 60 s and 100 s, respectively.
It is used to measure the ink viscosity in the laboratory and determine the apparent viscosity of the sample.
It is also suitable for measuring the viscosity of paint semi-finished products with similar viscosity
For the selection of the above-mentioned viscosity detection root types of instruments, you can log in to Cha Instruments. The viscosity model under the category of raw material liquid performance detection has a detailed introduction, or you can directly click this link to learn → http://cha.nbchao.com/category1 .html
刘登良 - 《《涂料工艺》》
郭丹 - 《青岛科技大学》