Back
Knowledge

Parameter comparison of Pull-off adhesion Tester for popular Defelsko models

Author: Xiaohua
Source: 南北潮商城
Abstract: 本文以Defelsko品牌的几款热门拉开法附着力仪为研究对象,对它们的选型参数进行了详细对比。拉开法附着力仪主要用于检测涂层从底材上剥离的能力,通常分为数显式和机械式两种类型。对比结果显示,ATM50A-B和ATM20A-B属于数显式仪器,测量范围分别为50-560psi(0.43.8MPa)和100-3500psi(0.724MPa),精度均为±1%满量程,分辨率可达±1psi(0.01MPa)。ATM50A和ATM20A则为机械式仪器,测量范围分别为100–3000psi(0.720MPa)和0-3000psi(0~20MPa),精度同样为±1%满量程。从应用领域来看,ATM50A-B和ATM50A适用于混凝土、木材和塑料涂层的剥离检测,而ATM20A-B和ATM20A则主要用于金属涂层的剥离测试。用户可根据实际需求选择合适的仪器类型和参数设置。

The pull-off method adhesion Tester is mainly a detection instrument for peeling off the coating per unit area from the coating substrate. This issue mainly compares the selection parameters of several popular models of Defelsko's pull-off adhesion Tester, as shown in the table below. Users can select models according to their actual needs. For more product selections of adhesion Testers, please log in and search for information.


Compare categoryATM50A-BATM50AATM20A-BATM20A
product pictureParameter comparison of Defelsko’s popular models of pull-off adhesion Tester with Figure 1Comparison of parameters of Defelsko's popular models of pull-off adhesion Tester with Figure 2Parameter comparison of Defelsko’s popular models of pull-off adhesion Tester with Figure 3Figure 4
brandDefelskoDefelskoDefelskoDefelsko
place of originU.S.U.S.U.S.U.S.
Model comparison



typedigital displaymechanicaldigital displaymechanical
Specification comparison



Measuring range50~560psi(0.4~3.8MPa)100 – 3000 psi (0.7~20MPa)100 ~ 3500 psi (0.7 ~ 24MPa)0~3000psi(0~20MPa)
precision±1% full scale±1% full scale±1% full scale±1% full scale
resolution±1psi(0.01MPa)±1psi(0.01MPa)±1psi(0.01MPa)±1psi(0.01MPa)
typical applicationCoatings on concrete, wood, plasticsCoatings on concrete, wood, plasticscoating on metalcoating on metal
Products required
Relevant knowledge
Guess you like it