A little knowledge of winter maintenance of ultra-pure water machine

Facing the cold winter season, how to maintain the ultrapure water machine, see the following analysis.

1. Regularly check all water pipes

The water pipe of the ultrapure water machine is made of plastic material, which is easy to harden when the temperature is too low, and will break when subjected to a large external force. Therefore, it is better to do regular inspections and take protective measures in time when problems are found.

2. Antifreeze for the whole machine

Since the volume of water freezes will expand, it is necessary to stop using the equipment when the ambient temperature is below zero. If the ultrapure water equipment is not used for a long time, the water inlet ball valve must be closed to drain all the water in the equipment.

If the ultra-pure water equipment is installed outdoors, antifreeze measures are required, otherwise it may cause the filter bottle, membrane shell, etc. to freeze and crack.

3. Water freezing in the equipment

If the water in the device freezes, immediately place the whole device in a room with a higher temperature to thaw naturally, and use it only after it is completely thawed. During the thawing period, it is not allowed to turn on the water machine forcibly. After thawing, first check whether there is any abnormality in the appearance of each part, and then turn it on to check whether it is operating normally. If there is any abnormality in operation, you can contact Aicopu engineers for maintenance.

All in all, due to the low temperature in winter, ultrapure water machines are more prone to problems than other times, which requires us to use and maintain ultrapure water machines more scientifically and carefully.