Film preparation and inspection of Physical and Mechanical Properties - "Determination of film Hardness"
There is no method for measuring hardness in my country's national standard. The ministry standard HGZ-507-67 has been used for a long time. It is generally recognized that this method has high accuracy, but it is time-consuming and tiresome. Now it is going to be changed to the photoelectric counting method to measure hardness. The pendulum rods specified in ISO1522-73 are all simple pendulums, which are worth suggesting. my country's Ministry of Standards stipulates that the total mass of the pendulum is 120 ± z grams, while ISO1522-73 stipulates that it is 00 ± 0.2 grams or 500 ± 0.2 grams. It seems that the ISO pendulum does not seem to be suitable for the situation in our country, because sometimes the coating film in our country is not dry enough to measure the hardness, so the hardness value will vary greatly. ASTM D1474 stipulates two methods for measuring the hardness of the notch. Compared with the pendulum Hardness Tester, it is close to the real hardness in principle, but the instrument is more complicated.
- 1Paints and varnishes Pendulum damping test method under ISO 1522
- 2GB/T1730 Interpretation of Koenig and Persaz pendulum damping test
- 3Swing bar hardness testing: a method for evaluating film hardness
- 4Pendulum damping test method for the determination of film hardness
- 5Film hardness testing method: pendulum hardness, pencil hardness, etc
- 6How much do you know about the difference between Konig pendulum and Persoz pendulum of Pendula Hardness Tester?
- 7Pendula Hardness Tester calibrating steps
- 8Are hardness and wear resistance the same?
- 9What are the hardness test methods?
