Spreader wet film thickness conversion
Abstract:
本文介绍了涂布湿膜厚度的换算方法，通过公式“湿膜厚度 = 每平方米的涂布量(g) / (密度 x 固含量%)”进行计算。同时，提醒用户该公式仅供参考，实际结果可能因产品粘度、延展率、钢丝线棒类型和底材等因素有所不同。为了更加准确地选择合适的钢丝线棒，建议用户结合具体条件进行湿膜厚度的计算。
If you don't know the wet film thickness, how do I choose the right wire bar for me?
The thickness of the coated wet film can be converted according to the following formula:
Wet film thickness = coating amount per square meter g/(density X solid content%)
您也可以使用湿膜厚度计算器进行计算：
It should be noted that the above formula is for reference only, and is actually affected by various factors such as product viscosity, elongation, steel wire rod type, substrate, etc., and will be different.
Products required
Relevant knowledge
- 1Why Do Film Applicators Need to Change Their Wires Regularly?
- 2Mayer-Rod (Mayer Rods) Preparative 2D Copper Nanosheets
- 3The overlooked role of Mayer Rods in laboratory wet-film preparation
- 4Advantages and Categories of Mayer Rods in Spreader wet-film prepative
- 5Determination method of dry and wet paint film thickness
- 6Mayer Rods: The right-hand man for hiding power tests
- 7Wet film thickness measurement tool and applicable method
- 8Different types of coating rods
- 9Wet film thickness measurement and coating mass control
Guess you like it
