DHG-9070A Blast Drying Oven operating instructions

1. Put the items into the drying box and close the door. Turn the damper knob to the appropriate position according to the humidity of the dry item, generally to the "Z" position; if it is relatively wet, adjust the adjustment knob to the "3" position.

2. Turn on the power and fan switch.

3. Press the SET key once, and use the shift key to set the required temperature. After setting, press the SET key to enter the timing function, and use the plus key to set the required time. If the timing function is not used, press the SET key again.

4. After drying, if you need to replace the dry items, turn off the fan switch before opening the box door to prevent the dry items from being blown off; if you do not take out the items immediately, you should first turn the damper adjustment knob to "Z" , and then turn off the power switch to keep the box dry; if you don’t want to continue drying the items , put the damper at "3" and turn off the power switch. After the working room cools down to room temperature, take out the dry items in the box and place Studio wipe dry.