How to calibrate Moisture meter

 When using a trace moisture analyzer, we need to calibrate, which is a very important step. The purpose of this is to make the measured value more accurate. We also know that we must pay attention to methods in everything, and its calibration is the same. People who don't know much may be confused. In order to allow users to use it more scientifically, the following methods are introduced for you.

Press the "Method" button, select "Method 3-Moisture Calibration", select "1 Measurement" after confirmation, select the standard product after confirmation, input the amount of the standard product, and press the "Start" button after confirmation to start the calibration procedure. After the measurement is over, press the "OK" button to save and print the calibration results, and return to the system hold state for other procedures. Please repeat this operation for multiple calibrations.

The measurement of reagent titer is a necessary work in the experiment. Especially when the titer of the standard solution changes or may change due to some factors such as the infiltration of moisture in the atmosphere and the change of the ambient temperature, it is more necessary and important. The frequency of reagent calibration mainly depends on the choice of titration reagents. Different reagents have different stability. In addition, the storage of titrants is not absolutely sealed, so it is recommended to perform calibration before titration every day.

The above points are the methods for calibrating the trace moisture analyzer. In order to better use the analyzer, it is necessary for us to understand and master the above methods.