Operation Method of Baoda Laboratory Scraper Spreader

Baoda's laboratory small electric knife coater is an automatic coating equipment that can satisfy different users to coat accurate wet film samples on different substrates. Small coaters can use variable speed motors to precisely control the coating speed. And by controlling the speed and stabilizing the pressure to ensure the final coating effect, it has higher coating uniformity and repeatability.

So how does the blade coater work?

The specific operation steps are as follows:

1. Connect the power supply

2. Place the substrate to be coated (such as: black and white paper) flat on the coating base, and clamp it with a clamp

3. Place the horizontal push rod on the fixed rods on both sides of the coating base

4. Place the Film Applicator in front of the horizontal push rod

5. Adjust the speed control knob to choose the appropriate coating speed

6. Place an appropriate amount of paint to be coated directly in front of the Film Applicator

7. Start the switch and start coating

8. After the coating stops, scrape the remaining paint into the waste collection tray

9. Remove the prepared template

Precautions for use

1. The coating base should be kept clean, and no debris should stick to it, so as not to affect the flatness of the coating base, thereby affecting the next coating; if the paint is accidentally dripped on the coating base, it should be cleaned in time .

2. After determining the size of the coated substrate, clamp the coated substrate with a clamp to improve the fixing effect.

3. After each use of the coating machine, the waste should be cleaned in time.