What are the performance requirements of the constant temperature and humidity Test Chamber?

Under the performance requirements of the Incubator and the constant temperature and Humidity Chamber, the performance required for the environmental test of the Incubator and the constant temperature and Humidity Chamber is as follows:

(1) The temperature distribution and humidity distribution of each part of the box should be uniform, that is, the difference caused by the position change. (Temperature and humidity should not fluctuate temporarily due to temperature and humidity control or external disturbance.

(3) Regardless of whether the sample is emitted or absorbed, the temperature and humidity in the storage tank need to be stable.

(9) When placing the sample into the Test Chamber, sufficient heating, cooling and moisture supply capacity should be provided to reach the specified temperature and humidity as soon as possible.

(5) For program-controlled heating and cooling, it is necessary to fully follow the programmed procedure, and the thermal inertia should be small.

(6) The structure of the constant temperature and Humidity Chamber needs to have the following characteristics: The sample should not be heated or cooled due to direct heat radiation or heat transfer. In addition, according to the test requirements, if the air in the specified box is not circulated, the above requirements are also met.

(7) The actual temperature or humidity in the storage tank should be exactly the same as the scale indication of the temperature indicator or humidity indicator.

(8) The test box needs to be able to run continuously for a long time without failure. The clear warranty time allows users to use it with confidence. The above points are important. In addition, there are the following points:

(9) The ratio of the total volume of the Test Chamber to the effective volume is very small. In particular, floor space must not be used.

(10) What needs to be done: the water and electricity consumption basin is small, durable, low parts consumption, convenient maintenance, and low price.