Troubleshooting Guide: The Most Common Reasons for Incorrect Reading from Moisture Meters

The main purpose of using a Moisture Meter is to gather information accurately and accurately. If things start to go wrong, it can cause serious problems when you rely on reliable instant results.

The Moisture Meter is built to last. They are durable enough to last for years in the field. If you're struggling to get accurate readings with your Moisture Meter, don't worry. Moisture meters are designed to work just fine. There are a few things you can check to make sure you're getting a good measurement reading.

Check your calibration

Is the Moisture Meter set to the correct calibration? Especially if you're going to be reading a variety of materials, you'll need to make sure you've calibrated the Moisture Meter for what you need to measure. When using a Moisture Meter, there are a number of calibration kits pre-installed with every Moisture Meter, but it is important to make sure you select the correct one.

Improper calibration can seriously affect your readings. Even using the wrong grain calibration with a grain Moisture Meter, for example barley instead of corn, will give you inaccurate readings.

Check to make sure you have the correct calibration settings and are using the correct meter for the job. For example, a cement Moisture Meter will not give you correct readings for paper or wood.

correct storage

Has the Moisture Meter been properly stored after use? And wipe with a dry cloth after each use to remove excess moisture, which can cause rust. Proper storage and drying of your Moisture Meter will extend the life of your Moisture Meter and give you great results time and time again.

While electricity meters are durable and will last for years in the field, accidents can still happen. Storing the Moisture Meter can prevent problems caused by water, or prevent damage to the Moisture Meter if it is dropped or crushed. If you think the meter has been damaged in some way, please let us know! We want to make sure you have the most accurate meter on the market.

pin damage

Are the pins of the instrument in good condition? The pins of a general purpose Moisture Meter can end up rusted or potentially damaged if exposed to the elements. While making your meter durable, sometimes your meter may need new pins to get accurate readings. Inspect your gauge, especially the pins for impact damage, rust, or other issues that could interfere with gauge and sample contact.

use the correct sample

Test in a few areas to make sure you get an idea of ​​the changes across the product, especially if you're dealing with a lot of product. For example, if you want to check that a large pile of good carpentry has been adapted to its interior environment, you will need to check multiple areas on several pieces of wood.

If you are taking readings on grains and seeds, you need to make sure it has cooled after the drying process. Take readings from multiple locations throughout the batch. Waiting for the concrete slab to dry or cure? Check in multiple locations.