Coated 4 viscosity cup - this one is really affordable!

Tu 4 Viscosity Cup is a national standard coating Viscosity Cup specified by GB standard, with a measuring diameter of 4mm and a volume of 100ml. It is widely used in experimental viscosity testing in the paint and ink industry. There are many brands of Tu 4 Viscosity Cups on the market. After all, the coating and ink industry has such a wide market, basically many coating equipment manufacturers will produce 4-coated Viscosity Cups. Such as Modern Environment, Jingke, Pushhen, Yueping, Yonglida and so on.

There are more than 200 types of Viscosity Cups on the NBCHAO Mall, of different types and brands, ranging from high-end to low-end. The brands mentioned above are also gathered in NBCHAO. Today, we don’t talk about imports or high-end products, but talk about an economical and affordable Tu 4 Viscosity Cup, the price is only 280 yuan, which meets the GB/T 1723 standard and can be measured! Where is it sacred? look at the picture below

The overall appearance is not quite expensive. The whole set of Viscosity Cup is composed of a bracket with a cross arm with a circular blister, a receiving cup, and a Viscosity Cup frame. The Viscosity Cup and the receiving cup are made of stainless steel. The surface of the cup is well polished and has good wear resistance. corrosion resistance.

Compared with ordinary Viscosity Cups, NDJ-5 Tu 4 Viscosity Cups have an outlet switch design, which makes it more convenient to control the flow of liquids. Of course, some customers say that I am used to blocking them with my hands. The accuracy error of the viscosity test of this Viscosity Cup is only 3%. The Viscosity Cup is designed in strict accordance with the GB/1723 standard, and the outside is also designed with a groove to accommodate the overflow fluid, which will not cause the sample to leak out and pollute the environment during the test.

The Viscosity Cup is equipped with a bracket. The bracket has a cross arm with a built-in foaming level to place the Viscosity Cup. The base of the bracket is designed with a gravure type, which can well fix the cup. The height of the entire bracket is 255mm, and the height of the cross arm can be adjusted freely to meet the test requirements of different experimental environments and the different usage habits of different operators.

how? Is it a very economical and affordable Tu 4 Viscosity Cup? For more details, please visit https://www.nbchao.com/p/578/