Back
Knowledge

Installation and use of Fangrui Rotational Viscometer No. 0 rotor

Abstract: 本文介绍了方瑞旋转粘度计0号转子的安装和使用方法。0号转子主要用于粘度低于15cp的样品,其安装过程包括以下步骤:将0号转子顺时针旋转装在转子连接螺杆上,然后将固定套筒套入仪器底部,并用固定螺钉紧固;倒入20ml样品于试筒中,并将试筒套入固定套筒中,最后用试筒固定螺钉紧固。使用时需要注意不要在没有样品的情况下进行空载旋转,同时无需使用转子保护架。详细的安装步骤和注意事项确保了测试的准确性。

Fangrui viscometer has the automatic scanning function of viscosity test. It is recommended to have a good combination of rotor and rotation speed . Rotor 0 is used.

The No. 0 rotor of the Fangrui Rotational Viscometer is composed of three devices: a fixed sleeve, a No. 0 rotor and a test cylinder. This article introduces how to install and use the No. 0 rotor of this viscometer.

(1) The No. 0 rotor component is composed of a fixed sleeve, a No. 0 rotor and a test tube. Its structure is shown in Figure 1. This part can only be used for the No. 0 rotor measurement, and it is not suitable for other rotor tests.

Fangrui rotary viscometer No. 0 rotor installation and use method with picture 1

Figure 1  No. 0 rotor components

(2) The installation of the No. 0 rotor is shown in Figure 2. First, rotate the No. 0 rotor clockwise and install it on the rotor connecting screw (universal joint).

Fangrui rotary viscometer No. 0 rotor installation and use method with picture 2

figure 2

(3) Put the fixing sleeve into the round plate of the lower cover at the bottom of the instrument from bottom to top, be careful not to touch the No. 0 rotor, and tighten it with the sleeve fixing screw.

(4) Pour 20ml of the sample to be tested into the test cylinder.

(5) Insert the test tube containing the sample into the fixing sleeve slowly from bottom to top until it rises to the top, and fasten it with the test tube fixing screw. When tightening, pay attention to the tapered end of the test tube fixing screw. Screw it into the triangular groove on the upper end of the outer wall of the test slip. All installed No. 0 rotor components are shown in Figure 3. After controlling the temperature of the liquid to be tested and adjusting the horizontal state of the instrument, the test can be carried out.

Fangrui rotary viscometer No. 0 rotor installation and use method with picture 3

image 3

(6) Note that when the No. 0 rotor is used, it cannot be rotated without load when there is no fluid loaded, and the No. 0 rotor does not need to install the rotor protection frame when it is used.

Of course, Fangrui viscometer also has other optional accessories, such as a small amount of sample adapter, temperature probe, and more Rotational Viscometers, which can be found in the viscometer special page https://www.nbchao.com/list11/ of NBCHAO Mall .

Products required
Relevant knowledge
Guess you like it