Infrared frontal thermometer DT-8807S how to operate and precautions?

temperature measurement

The meter measuring probe is aimed at the measuring site (forehead/behind the earlobe/underarm/ear hole), keeping a distance of 1~4cm.

After pressing the measurement button for about one second, the beep will sound "beep" to indicate that the measurement is completed, and the LED screen will display the temperature reading. .

When the temperature measurement function of the instrument is set to the human body mode, "LO" will be displayed when the detected body temperature is lower than 35°C; " HI" will be displayed when the body temperature is higher than 42°C.

Precautions for body temperature measurement

The correct operation method is the key to measurement accuracy, because infrared temperature measurement has higher requirements on the surrounding environment temperature, please pay attention to the following tips when using it:

• When measuring body temperature, please point the thermometer at the center of the forehead (above the eyebrows and keep it vertical). The measurement site should not be covered by hair, sweat, hats, etc., and please confirm that the measurement distance is 1~4cm.

• The person under test comes from a place with a large difference in ambient temperature (such as a low temperature outdoor environment and a high temperature indoor environment), and should be allowed to wait for 5 to 15 minutes .

• Cold compresses on the forehead of patients with fever, sweating and other cooling measures will lead to low measurement results, and measurement in this case .

• When the thermometer is taken out from a place with a large difference in ambient temperature and used, it should be placed in the measurement environment to stabilize for 20 to 30 minutes before use.

• Do not measure body temperature in places with strong airflow, such as the air outlet of the air conditioner or under the fan.

• Do not blow air on the temperature probe.

troubleshooting

wrong reason	reason	Approach
	Ambient temperature changes too fast	Please place the product under the tested environment (15 ~ 35*C) for at least 30 minutes
	The ambient temperature is outside the range of 15~35°C	Please place the product in the environment under test (15 ~ 35°C) for at least 30 minutes
	Human body model: measure temperature above 42°C	Please use it within the measurable temperature range. If there is another error message, please call the customer service hotline
	Human body model: measure temperature below 35°C	Please use it within the measurable temperature range. If there is another error message, please call the customer service hotline
Press the button and nothing happens	The battery is dead; the battery is reversed	Please replace the battery and install the battery correctly

    FAQ

Maintenance and Cleaning

• Do not get close to hot objects.

• Use batteries within specifications, and do not mix rechargeable batteries with other batteries.

• In order to prevent product failure, do not disassemble the product arbitrarily.

• If the product is dropped or impacted, there will be errors in the test.

• After the test, use neutral detergent and clean water to clean, then wipe the water with a soft cloth and put it in the battery box for storage.

• Please take out the battery for storage when not in use for a long time.