Use a film coating machine to apply slurry on aluminum foil, have you encountered this embarrassment?
The coating film on aluminum foil is often difficult to level due to the substrate, so it is very easy to cause uneven wet film during scraping, making it difficult to prepare samples, let alone accurately control the amount.
A common application is to prepare battery slurry on aluminum foil. The total viscosity of the slurry is not high. To solve the problem of flattening the aluminum foil, it can be scraped and coated with a scraper or wire rod. However, it is often also because in practical applications, there are more slurries that need to be scraped and coated. If a film of a certain format needs to be prepared, the supply of materials will be relatively embarrassing. So there is the picture below.
The solution is not without. Through practical application, Beichao provides an automatic feeding solution on the film coating machine. On the basis of satisfying the flatness of aluminum foil and the accuracy of wire rods, it provides a solution for automatic feeding. In high-precision manufacturing On the basis of the film, the hands are further liberated.
- 1How Flat Film Applicators Can Build a New Generation of Functional Materials on Fabrics
- 2NVP anode film FAQ and solution
- 3Application Technology of Laboratory Film Applicator in Dielectric Thin Film
- 4Comparison of Advantages and Disadvantages of Three Heating modes for Laboratory Film Applicators
- 5Application and selection of laboratory coater in PDMS thin film prepative
- 6Scraping machine selection case: film substrate large size high accuracy scraping solution
- 7Application of Film Applicator in PEM Research and Preparation
- 8Application of Film Applicator in PVDF-HFP Material Research
- 9Application of Film Applicator in Cosmetic Base Body
