Precautions for the use of MiKroTest McCourt Mechanical Coating Thickness G6

As a precision instrument, MiKroTestG6 McCourt coating Thickness Gauge should pay attention to some operating skills during use. Users need to operate and maintain it correctly, otherwise it will easily cause unnecessary failures . Summarize the use of G6 Thickness Gauge at 10 points Notes, as follows:

1. The two models of MiKroTest are only suitable for coating measurement on steel substrates.

2. After receiving the goods, be sure to carefully check the instructions against the actual product, and use it in strict accordance with the operation and maintenance items.

3. The upper gear of the instrument can only be manually pushed in one direction.

4. After each use test, the upper gear needs to be manually pushed to the vicinity of the full scale 100 (any position between the full scale 100 and G is also acceptable, and the G point cannot be pushed).

5. The instrument should not be stored or used in a strong magnetic field environment, otherwise it will be easily degaussed and cause the accuracy of the instrument to drop or fail to test.

6. During the test, the surrounding environment or the hand holding the instrument should not have a large vibration , otherwise it will cause the deviation of the test.

7. Before the test, the surface of the test sample and the measuring nozzle of the instrument need to be wiped clean , otherwise it will cause errors. (After all, it is a micron-level test)

8. The instrument should not be subjected to violent collision or falling to a large extent.

9. During normal storage or use , do not allow corrosive liquids or gaseous substances to enter the interior of the instrument, because the instrument as a whole is not fully enclosed.

10. If it is used after a period of time , the first measurement may be inaccurate due to the unsmooth internal transmission . After several consecutive measurements, the measured value shall prevail.