Thickness Gauge Collection: How to measure the thickness of the coating on a rough surface?

The test of the coating Thickness Gauge is generally to test the thickness of the coating on a flat surface, but for the rough surface, it is bound to be inaccurate to test with an ordinary coating Thickness Gauge, and there will be many peaks on the rough surface The trough, so the probe can only measure a certain part and cannot completely fit the surface to be measured, so is there any solution?

Of course there are, as long as there is demand, there will be products, it's just a matter of priority. Although there are very few coating Thickness Gauges that can test rough surfaces, today I still search for a Thickness Gauge that can measure rough surface coatings - defelsko FHXS coating Thickness Gauge, which can not only test rough surfaces It can also measure the coating thickness of high temperature samples.

Let's take a look at the specific technical parameters of this coating Thickness Gauge for a quick look.

Physical Properties - Film Thickness
	Defelsko PosiTector 6000 FHXS3 Coating Thickness Gauge
	Specification parameters: measurement principle magnetic induction, measurement range 0~10000μm, error range ±3%, resolution 0.1μm, probe FHXS Xtreme, statistics function continuously display/update average value, standard deviation, minimum/maximum and number of readings, graphic function Yes, power supply 3*AAA alkaline batteries, meet the standards ISO 2178/2360/2808, PrEN ISO 19840, ASTM B499/D1186/D1400/D7091/E376/G12, BS3900-C5, SSPC-PA2, etc. Calibration certificate Yes, system Language Chinese, English, display screen 2.8-inch color touch screen, data interface USB, Bluetooth communication, supporting software PosiSoft software suite, machine weight 137g (excluding battery), machine size 127*66*25.4mm, data storage 250,000 measurements Value, 1000 groups, test environment ferrous metal substrate non-magnetic coating environment, Defelsko calibration standard STDP7, save 100 screen images, protection class IP65, measurement speed more than 180 readings per minute
	Defelsko PosiTector 6000 FHXS1 Coating Thickness Gauge
	Specification parameters: measurement principle magnetic induction, measurement range 0~10000μm, error range ±3%, resolution 0.1μm, probe FHXS Xtreme, statistics function continuously display/update average value, standard deviation, minimum/maximum and number of readings, graphic function None, power supply 3*AAA alkaline batteries, meet the standards ISO 2178/2360/2808, PrEN ISO 19840, ASTM B499/D1186/D1400/D7091/E376/G12, BS3900-C5, SSPC-PA2, etc., calibration certificate yes, system Language Chinese, English, display screen 2.8-inch color touch screen, data interface USB, supporting software PosiSoft software suite, machine weight 137g (excluding battery), machine size 127*66*25.4mm, data storage 1000 measured values, test Environment Non-magnetic coating environment on ferrous metal substrate, Defelsko calibration standard STDP7, screen image save 100, protection class IP65, measurement speed more than 60 readings per minute

After reading the above technical parameters, you basically have a basic understanding of this coating Thickness Gauge. If you want to determine in detail whether it is suitable for your experimental thickness measurement needs, you need to discuss with Beichao Technology.

The following is the appearance display of the host of the defelsko coating Thickness Gauge for your understanding.