What are the common stripping test applications and test standards?

peel test

Peel tests are performed between two substrates bonded together with an adhesive. These substrates can be flexible, or one can be flexible and the other rigid. The adhesive itself is usually in the form of a thin layer between two substrates, such as the adhesive on the underside of a piece of tape placed on a steel plate.

In general, the purpose of a peel test is to determine the bond strength of a material. This bond strength may be referred to as the "tack" of the material, as it is a measure of the resistance of the samples to separate from each other after the adhesive has been applied. This measurement can be used to determine if the adhesive has the required strength and if a different adhesive or bonding process needs to be used.

What are the common peel test applications?

Peel Adhesion Strength of Coating Material

Test the peel bond strength of labels and tapes

Peel Test of Sandwich Specimen

Metal foil 180 degree peel test

Textile Peel Test

Touch and close fastener peel strength

180 degree peel test of plastic film

Pressure Sensitive Adhesive and Tape Loop Adhesion Testing

Tensile, Shear and Peel Testing of Epoxy Resins and Adhesives

Adhesion Strength of Rubber to Textiles

Adhesive Peel Strength

Coating Adhesion to Rubber or Plastic Coated Fabrics

Packaging seal strength test equipment

Rubber to metal bond strength test

What are the common peel test standards?

ASTM B533 Test Method for Peel Strength of Metal Plated Plastics

ASTM C794 Test Method for Peel Adhesion of Elastic Joint Sealants

ASTM D1781 Adhesive climbing bucket peel test method

ASTM D1876 Test Method for Peel Resistance of Adhesives (T-Peel Test)

ASTM D2979 Test Method for Pressure Sensitive Adhesion of Adhesives

ASTM D3167 Test Method for Peel Resistance of Adhesive Dancer Rolls

ASTM D3330 Peel Adhesive Pressure Sensitive Tape

ASTM D429 Test Method for Properties of Rubber; Adhesion to Rigid Substrates

ASTM D5170 Test Method for Peel Strength of Hook and Loop Fasteners ("T" Method)

ASTM D6252 Test Method for Peel Adhesion of 90-Corner Pressure-Sensitive Label Paper

ASTM D6862 Adhesive 90 degree peel resistance test method

ASTM D903 Test Method for Peel or Peel Strength of Adhesives

ASTM F88 Flexible Barrier Seal Strength Test Equipment

ISO 4578 Peel Resistance Test Adhesives