VibratIon Meter application

VibratIon Meters are mainly used in the field of equipment management and machinery manufacturing. Vibration Testers can measure vibration in velocity, acceleration, RMS, peak-to-peak, and displacement. Vibration Testers can be used to monitor and diagnose problems with bearings, machines, engines, and more.

Application of vibration measuring instrument in the field of equipment management

The largest user group of the vibratIon Meter is the power industry:

Mainly used in thermal power plants, such as large generating units (steam turbines, generators, blowers, induced draft fans, etc.), the operating status of these equipment will directly affect the production of the power plant. And some important equipment that cannot be stopped at will not only need a real-time online monitoring system, but also need a portable vibratIon Meter to provide simple measurement and preliminary diagnosis at any time.

The second largest user group of vibratIon Meters is the steel group:

Among them, there is an affiliated factory with assembly line operation, equipped with various rotating equipment. Such as: continuously running hoist, centrifugal blower, induced draft fan, slag discharger, reducer that drives the rotation of the heating furnace grate, etc. In addition, the cooling circulating water pump plays an important role in the normal operation of the boiler, and even the safe and stable operation of the entire support unit. (For example: the mismatch between the boiler drum and the induced air will cause the boiler to operate under positive pressure, which is likely to cause an explosion. The cooling circulating water pump stops due to excessive vibration, and cannot supply water normally, which will also cause the boiler to operate abnormally. Every link of these are interlinked,

 In addition, there are many continuous operation equipment in the pharmaceutical industry ,

So it's also a big industrial user. Among them, many equipment such as Air Compressors and electrical appliances require vibration measurement.

Tobacco industry:

The tobacco industry has excellent equipment and a high degree of automation, and it also pays special attention to equipment maintenance. The main measuring equipment includes dust removal fan, Air Compressor, silk making equipment, etc.

Application of Vibration Meter in Machinery Manufacturing Field

Different vibration equipment should comply with relevant industry standards. This includes quality checks of machines and equipment before they leave the factory. like:

Blower, induced draft fan factory , these equipment need to carry out vibration measurement when leaving the factory. Compared with the national standard, measure whether the vibration of a certain equipment exceeds the standard. (JB/T10391-2002)

Motor factory: For some units that produce motors, the two parameters that need to be evaluated before the motor leaves the factory are: vibration and dry noise.

Bearing manufacturers: measure the vibration value of large bearings.

in conclusion

In conclusion, the degree of automation of modern factory machinery is constantly increasing. Equipment has always been an important part of the economic benefits of enterprise manufacturing. Using condition monitoring and fault diagnosis technology, you can easily, quickly and effectively grasp the operating status of equipment and improve the level of equipment management.