Frequently Asked Questions for Inventory 2022 Viscosity Cups

1. Q: What is the difference between din Viscosity Cup and iso Viscosity Cup?

     Answer: Hello! The standards of the iso Viscosity Cup and the din Viscosity Cup are different. The standard of the din Viscosity Cup is DIN 53211, while the standard of the iso Viscosity Cup is ISO 2431. Secondly, the appearance of the two is also different. The din Viscosity Cup is for the funnel type, while the iso Viscosity Cup is a cylinder. Thank you for your advice!

2. Question: How much is the price of 3mm Viscosity Cup?

     Answer: Hello dear, according to different standards, Viscosity Cups are divided into Zion cups, ISO cups, DIN cups, Ford cups, etc. What kind of Viscosity Cups do you need?

3. Question: How to calibrate the Viscosity Cup?

     Answer: Hello! How to calibrate the Viscosity Cup can refer to the knowledge topic of the northern and southern tides.

4. Question: Is there any Viscosity Cup GB/T 2794-1995 that meets the standard parameters?

     Answer: Hello, this standard is an old standard, abolished, there is no corresponding Viscosity Cup, the new standard is GB/T 2794-2013.

5. Question: What fluids can your Viscosity Cup measure? Can PVC paste be tested?

     Answer: Hello! It is possible to test the fluid, but you need to confirm the specific conditions of the sample before you can determine whether the Viscosity Cup is compliant.

6. Question: We want to buy a Viscosity Cup but we are not sure what the viscosity is. We only know that the rotation range is about 7000cps. Is there any way to know which cup to choose? I want to buy a portable cup

     Answer: Hello! Viscosity reaches 7000cps, you can only use a viscometer to measure the viscosity, this viscosity is too high to use a Viscosity Cup to measure.

7. Question: I would like to ask the following, which viscometer is better to use to measure the viscosity of epoxy resin coating?

     Answer: Hello! Viscosity cups can be determined according to the test standard which kind of Viscosity Cup is required.

8. Question: Can all Viscosity Cups be used for testing in the DIN53211 standard?

     Answer: Hello! Not necessarily, but this ERICHSEN321-2mm Viscosity Cup can be considered.

9. Question: Is the titanium anodized aluminum Viscosity Cup better than stainless steel?

     Answer: Hello, the Viscosity Cup made of titanium anodized aluminum is better than stainless steel in some aspects, such as stronger corrosion resistance. In addition, titanium anodized aluminum not only has good hardness and wear resistance, but also has good heat resistance.

10. Question: Hello, do you have plastic coated 4 Viscosity Cups? Bakelite coated 4 cups. Do you have any information?

       Answer: Hello! The general materials of the four cups are stainless steel, aluminum alloy, copper and Bakelite. At present, there is no plastic.