Tensile machine

Using high-precision, non-clearance ball screw and timing belt as the guarantee of transmission system accuracy, fully computerized data collection and motion control, force measurement accuracy of 0.5 level, 1/300000 force value resolution.

Capacity 5T, force measurement accuracy +/- 0.5%, force measurement resolution 1/300000, effective force measurement range 1~ 100% F.S., can be used to test tensile, compression, bending, shearing, disbonding, tearing and other mechanical properties.

Force range of 10kg, measurement accuracy +/- 1%, force units kgf, gf, N, kN, lbf, stress units MPa, kPa, kgf/cm2, lbf/in2, with upper and lower limit safety settings, test breakpoint sensing.

Capacity 0~ 3kg, accuracy level 0.5, force range 0.02/100-100%, using imported electrical components, with peak holding, sample breaking stop function, support stepless speed regulation.

Range 50KN, load scale interval 0.001KN, with four test modes, four rail column structure, scale interval can be set freely, support automatic transmission and reset, qualified judgment, overload and leakage protection functions.

Capacity 0~ 300kg, accuracy level 0.5, force range 0.02/100-100%, using imported electrical components, with peak holding, sample breaking stop function, support stepless speed regulation.

Range 50N, load scale interval 0.001N, Test space 220mm, 7-inch touch screen, four test modes, with its own micro printer, in line with JB/T7796-2017 standard.

Capacity selection 1T, force resolution 1/300000, Control system uses full digital control Frequency AC motor, speed accuracy can be controlled within +/- 0.5%, Test speed range 1~ 500mm/min.

Measurement accuracy +/- 1%, resolution 1/200000, can be used for tensile strength, peeling strength, deformation rate, breaking force, disbonding force, opening force and other performance tests.

Equipped with a computer, it integrates measurement, control, calculation and storage functions. It has the function of automatically calculating stress, elongation, tensile strength and elasticity modulus, and the load is not greater than 20T.

Range 100N; 10Kg, load scale interval 0.01N; 0.001Kg; 0.01lb, deformation resolution 0.001mm, unit force value units: gf, Kgf, N, KN, tf, Lbf; Displacement units: mm, cm and in, Frequency 50HZ, force value error of in dication ≤ +/- 0.5%, stroke 170mm, Test space 260mm.