Flaw Detector

Automatic display echo related parameters, 100 detection channels, Scanning range 0~ 10000mm, automatic generation of DAC, AVG Linear dispersion, unrestricted sampling points, with waterproof, oil-proof, dustproof three functions.

High-precision quantitative positioning, auto calibration, free switching of three rulers, with gain compensation, oil-proof, waterproof and dustproof functions; built-in gate sound and light alarm, support screen freezing and thawing.

Full Chinese touch keyboard, intuitive and easy to remember, automatic measurement of probe performance, measurement of thickness and Speed of sound. Ten independent flaw detection channels, no need to carry test blocks for on-site flaw detection. Real-time display of defect echoes and display of weld profiles.

Scanning range 0~ 1000mm, vertical Linearity < 3%, localizable and qualitative defects, Automatic calibration, Linear dispersion automatic generation, unlimited sampling points, four probe working modes.

Detection range (0~ 15000) mm, Working Frequency (0.2~ 20) MHz, Speed of sound range (100~ 20000) m/s, Repeability Frequency (20~ 2000) Hz, Dynamic range ≥ 36dB, Vertical Linearity ≤ 1.5%, Horizontal Linearity ≤ 0.1%, resolution > 42dB (5P14), Sensitivity margin > 65dB (depth 200mm in 2 flat bottom hole).

One-piece molding, magnetizing pole distance 0~ 220mm, in line with JB/T7411 standard, suitable for hull weld inspection, steel structure weld inspection and internal operation of Pressure Vessel.

The anode is grounded, the fan is forced to chill down, the focus size is 2.0 * 2.0mm, the radiation angle is 40 + 5 °, the focal length is 600mm, and the thickness of the workpiece is less than 40mm. A3 steel is tested.

Scanning range 0~ 6000mm, high-precision positioning, three-proof design, with Automatic calibration, automatic display of defect echo position, 100 individual inspection channels, with gain compensation and φ value calculation function.

Automatic display echo related parameters, Scanning range 0~ 10000mm, support single crystal, double crystal, penetration of three kinds of probe mode, automatic matching damping, with waterproof, oil-proof, dustproof three functions.

Scanning range 0~ 6000mm, 16 flaw detection channels, can store 980 A-scan images, Automatic calibration probe, 16 flaw detection channels, 4 kinds of weld type diagram function, can automatically display echo related parameters.

Ten independent flaw detection channels (electronic switching), peak memory, envelope function, easier to find the highest waveform, 500 flaw detection data instrument storage.

Automatic display echo related parameters, Scanning range 0~ 10000mm, can store 300 A-shaped graphics, single crystal, double crystal, penetration of three kinds of probe, with waterproof, oil-proof, dustproof three functions.

Can be adapted to electromagnetic yoke probe, horseshoe probe, magnetic ring three different probes, standard horseshoe yoke fillet weld probe, pole distance 20~ 160mm, thyristor switch, low voltage output.

Magnetized pole distance 0~ 220mm, DC, AC two power supply mode optional, in line with the JB/T7411 standard, load ratio of 50%, suitable for boilers, Pressure Vessels, pressure pipelines.

The single gate and double gate reading methods are optional, the peak reading and edge detection in the gate are optional, and the echo envelope waveform is used to facilitate manual experience judgment.

Detection range up to 0~ 20 meters, vertical Linearity ≤ 2.5%, horizontal Linearity ≤ 0.2%, resolution > 40dB (5P14 steel medium longitudinal wave), Sensitivity margin > 65dB (2.5MHz φ 20 straight probe.