Conductivity Meter

Ji-type pen conductivity meter, suitable for the measurement of conventional liquid Conductivity detector value, measurement accuracy: 1% F.S.

Measurement range 0~ 2X100000 μs/cm, measurement error +/- 1.5% F.S, temperature compensation range 15~ 35 ℃, power supply AC220 +/- 10%, 50Hz, electrode constant specifications 0.01, 0.1, 1, 10, recording output (0~ 20) mV, Power consumption 5w.

It has four measurement functions of conductivity, TDS, salinity and resistivity. It supports 1 to 5 point button calibrate, built-in system menu can customize 11 function parameters, Measurement accuracy up to 0.5% F.S. The instrument is equipped with a large screen backlit LCD screen and automatic temperature compensation.

Conductivity detector electrode with platinum, based on Android Operating system, with conductivity, TDS, salinity, resistivity and Conductivity detector ash Measurement mode, Measurement accuracy: 0.5% F.S.

Level 1.0, measurement conductivity, Electrical resistivity, TDS, salinity value, temperature, standard composite Conductivity detector electrode, electrode holder, dust cover and calibrated solution, using high definition LCD, standard composite Conductivity detector electrode, electrode holder, dust cover and calibrated solution

Automatic temperature compensation, no need to calibrate, range 0.000~ 1.999 μS/cm, for the measurement conductivity of samples less than 2 μS/cm.

Measurement range 0~ 2000 ppm (mg/L), resolution 1ppm (mg/L), accuracy @25 ℃ +/- 2% F.S., waterproof design, suitable for drinking water, water treatment, reverse osmosis (RO) process, chilled down tower water quality, printing industry, etc.

Measurement conductivity, Electrical resistivity, total solid dissolved matter (TDS), salinity value, ash, temperature value parameters, standard composite Conductivity detector electrode, independent electrode holder, dust cover and bagged calibrated solution, intelligent operation, automatic identification, batch detection, data management, information traceability

Automatic temperature compensation, replaceable electrodes, conductivity range 0.0~ 99.9 μ S/cm, for monitoring deionized water, distillation water, mineral water.

Conductivity range 10~ 1999 µS/cm, Measurement accuracy +/- 1% F.S., platinum Conductivity detector electrode, automatic temperature compensation.

Classic conventional model, measure all kinds of liquid Conductivity detector, good stability, simple operation. With 0.1 specification electrode can measure pure water or high purity water

8 range automatic frequency conversion, automatic range switching, with 1.0 constant electrode, can cover full range measurement, multiparameter measurement, conductivity, resistivity, TDS, temperature, support reference temperature, temperature coefficient, TDS coefficient adjustable.

Level 1.0, 0.00μS/cm~ 200mS/cm, +/- 1.0% FS, TDS range 0.00mg/L~ 100g/L, high definition liquid crystal display, button operation, standard composite Conductivity detector electrode, electrode holder, dust cover