Densitometer

Using German HBM imported Sensors, better measurement repeatability, two steps to directly read the Density of any solid, granular, floating material, easy to operate. PC material sink, wear-resistant and drop-resistant, anti-corrosion, 0.5cm stainless steel cable, no bending No deformation, vertical with the hanging bar does not touch the sink, the percentage of main material content can be measured%.

Weighing range 0.01~ 600g, Density accuracy 0.001g/cm ³, Density measuring range 0.001~ 2.200g/cm ³, concentration range 0.1%~ 100.0%, test time is about 5 seconds, the results show Density and concentration values.

Density volume of solid, granular, thin film and floating body can be measured, the measurement range is 0.01g~ 300g, and the Density accuracy is 0.001g/cm3. When using water as a medium, the Density value can be displayed in only two steps.

Temperature control 15 ℃~ 40 ℃, with density g/cm3, density kg/m3, 4 degrees of water specific gravity, 20 degrees of water specific gravity, the same temperature water specific gravity Five Measuring methods, Precision +/- 0.0005g/cm3, manual injection, 64G memory.

Temperature control 15 ℃~ 40 ℃, with density g/cm3, density kg/m3, the same temperature water specific gravity, 20 degrees water specific gravity Measuring method, Precision +/- 0.0003g/cm3, manual injection, 64G memory.

Smart, using 7-inch touch screen, Image method Automatic Measurement angle, Tap Frequency: 0~ 300 rpm, External printer, can test Carr Angle of Repose, Carr Angle of Fall, Loose Bulk Density, Tapped Density, Carr Cohesion, Carr Uniformity, Carr Dispersibility, Voidage project.

Density and volume of any shape (solid block, particle, floating body) can be measured, with temperature compensation, RS232 interface, built-in battery can be measured on site

Range 0.005~ 300g, 0.001g/cm3 accuracy; solid-liquid dual-purpose; with RS232C interface; with windshield, temperature compensation can be set, in line with a variety of standards.

Temperature control 5 ℃~ 45 ℃, with density g/cm3, density kg/m3, 4 degrees of water specific gravity, 20 degrees of water specific gravity, the same temperature water specific gravity four Measuring methods, Precision +/- 0.0008g/cm3, automatic injection, 32G memory.

Direct reading Density and volume of solid blocks, particles, and floating bodies with Density > 1 or < 1 in any shape. 0.01g~ 900g weighing range, 0.01g/cm3 Density accuracy

Archimedes principle, Swiss imported electromagnetic force Sensors, automatic zero tracking function, rapid test of solid-state products Density value, suitable for micro-small products and high-density products Density detection

Compared with the traditional Wechsler Balance method and the Specific Gravity Bottle method, the operation is simpler, and it is not affected by external factors and temperature, so as to achieve fast and accurate measurement, which is suitable for applications such as quality management, formula development, and cost control.

Archimedes principle, density Measurement range 0.001~ 2.200g/cm ³, concentration range 0.1%~ 100.0%, test time about 5 seconds, the results show density, concentration value, suitable for chemical, food, petroleum and other fields of high viscosity, suspension, emulsion, colloidal liquid density test.