Drop Tester

Height adjustable range 300~1500mm, maximum load 100Kg, baseplate size 1700 * 1200mm, drop plane error less than 1 °, suitable for all kinds of Encasement testing requirements.

Adopting single-arm double-column structure, with automatic reset, electric drop and electric lift device, it is easy to use; the unique hydraulic buffer device greatly improves the service life, stability and safety of the machine.

The drop height is adjustable from 300 to 1500mm, the maximum weight of the specimen is about 0-60Kg, and the thickness of the baseplate is 10mm. The buffer device greatly improves the service life, stability and safety of the machine.

0 °, 45 °, 90 ° multi-angle drop device, drop height 300~2000mm, test load 2kg, vacuum adsorption drop, drop height can be set, automatic lift, accurate impact site, with Acceleration, speed measurement and other functions.

Test speed 5-20 times/min; drum width 350mm; test load 5kg, suitable for mobile phones, PDAs, electronic dictionaries and other small electronic consumer products for continuous rotary dropping test.

Test speed 5-20 times/min; drum width 350mm; test load 5kg, suitable for mobile phones, PDAs, electronic dictionaries and other small electronic consumer products for continuous rotary dropping test.

Simulate the different road conditions encountered by the product during transportation and design, its technical requirements and detection methods meet the requirements and regulations of international standards GB/T 4857.7 and ISTA standards, and are used to evaluate whether the structure of the carton Encasement has enough strength to meet the needs of long-distance transportation.

Drop 2 mobile phones at the same time, the test load is 2kg, the drop height is 60~150mm, the drop surface is aluminum material, the thickness is 12mm, and the baffle at the drop is reset; the number of buttons can be set to set the value, and the test can be automatically stopped.

Electric lifting, the drop height of 300~1500mm can be adjusted up and down, the drop height is displayed in real time, and a protective box is installed to prevent the product from rushing out after falling.

It is used to detect the ability of the carton to protect the product when it is suddenly dropped during transportation or handling. Photoelectric control can set the seven-level drop height, and can also choose the drop height freely. The drop height is 400~1500mm, and the weight is 100kg.

The drop height is 400~1500mm, and the weight is 65kg, which can well reproduce the damage suffered by the product when it falls from a high altitude. It is mainly used to detect the ability of the carton to protect the product when it suddenly falls during transportation or handling.

Can test 100kg load Encasement, drop height 300~1500mm adjustable, support water chestnut surface three drop mode, plane error less than 1 °.

Adopting single-arm double-column structure, it has electric reset, electronically controlled drop and electric lifting device, which is convenient to use; the unique buffer device greatly improves the service life, stability and safety of the machine. Single-arm setting makes it easy to place products.

2 stations, drop height 50~300mm, programmable controller for action program control, touch screen control, can be set to automatically stop the number of times, drop baffle reset.

Specimen size 1000 * 1000 * 1000mm, using computer imported electrical reasonable design, complete free fall, edges, corners, face all aspects of the design.