Bending Tester

Paints and varnish film flexibility, in line with GB6742, ISO1519, ASTMD522, DIN53152 standards, suitable for 1.0mm thickness of the sample.

Cylinder mandrel bending test, in line with GB6742 standard; suitable for 1.0mm thick sample; standard 13 different diameter shaft rod; manual operation.

According to GB/T1 2754-91 standard design, the test bending angle is less than 45 degrees, which is suitable for testing the bending test of color steel plates and steel strips and other coatings.

Cylinder mandrel bending test; standard 13 different diameters of the shaft bar; test plate substrate thickness requirements ≤ 1.0mm; in line with GB/T6742, ISO1519, ASTM/D522, DIN 53152 standards.

One-time bending angle < 45 °, flattening mechanism travel ≥ 10mm, test plate thickness 0.5~ 2.0mm, in line with GB/T12754 standard.

The mechanical tester for measuring varnish and Paints coatings can evaluate the cracking performance and elongation of coatings when they are bent around conical mandrel under standard conditions. It conforms to a variety of international or national standards, such as ISO6860-1984 (E), ASTMD522-60 (1979), BS3900; Part E11:1985, etc.

QTY-32 cylindrical mandrel bending tester evaluates the flexibility of paint film, with shaft rod diameter 2, 3, 4, 5, 6, 8, 12, 16, 20, 25, 32mm, in line with standards GB/T6742-86, ISO1519-73, ASTMD522, DIN53152

In line with standards ISO6860, ASTMD522, BS3900, GB/T11185, etc., the size of the test plate is 100mm * 180mm, and the thickness of the test plate is less than or equal to 0.8mm.

Conical bending measurement; in line with GB11185, ISO6860 standards; material is stainless steel; small size, light weight.

Compliant with GB/T 11185, ASTM D522 and ISO6860-84 standards, high-quality stainless steel conical mandrel with corresponding scale values for easy reading.

Anodic oxidation aluminum material; containing 12 stainless steel shaft rods; shaft bending test; in line with GB/T6740, ISO1519 standards.

The QTY-10A Paint Film Bending tester is used to evaluate the flexibility of the paint film, with eight different diameter shaft rods of 2, 3, 4, 5, 6, 8, 10 and 12mm.

GB11185-89 Test to evaluate the performance of coatings of Paints and varnishes against cracking or disbonding from a metal baseplate when bent about a tapered shaft under standard conditions.

Shaft rod size 2/3/4/5/6/8/10/12mm, surface size 200 × 58 × 14mm, bending shaft material stainless steel.

Paints varnishes bending cracking test, 12 different specifications bushing test different bending state film from the substrate flaking performance, in line with GB/T 7642, ISO 1519 standards.

Designed and manufactured according to the requirements of the manufacturer of color steel plate and Aluminum Panel for testing the flexibility T-Bend performance of color steel plate and Aluminum Panel. The equipment meets the requirements of NCCA "Standard" "T" Bend Test Method ".

The number of tests can be set, and the machine will automatically stop when it reaches the set value. In any static state, the machine will automatically slow back to the starting position and stop automatically.

In line with GB/T12754 standard, the first bending angle is < 45 °, the thickness of the test sample: 0.5~ 1.0mm, and the stroke of the flattening mechanism is ≥ 10mm.

In line with GB/T 6742 standard design, with 8 different diameters of cylindrical mandrel, stainless steel material, suitable for Paints, varnishes bending test.