Abrasion Tester

China general agent, original imported RCA wear test tape, cash sales low price, buy more discount! Inks, Coating, Switch, Keyboard, Rubber, Printing and other wear tests.

NormanTool China general agent, original genuine RCA paper tape, sufficient stock, buy more discounts, suitable for printing, silk screen, inks and other wear resistance tests.

Electronic counting type, the number of revolutions can be set, and there are three load options: 55g, 175g, and 275g.

Applicable to non-conductive film layer, friction distance 10~ 50mm adjustable, round trip 0~ 60 times adjustable, using stepless adjustable Rotation speed Frequency, can use eraser eraser or alcohol friction cloth.

Stepping motor, abrasive wheels size φ 51.6 × 12.7mm, load weight 250g, 500g, 750g, programmable control, by the LCD display instrument working parameters and status.

2 test stations, test load 50~ 1000g, using reciprocating operation, knob adjustment Test speed 5~ 60 times/min, standard rubber fixture, alcohol fixture and pencil fixture.

Four sets of stations, with two Lissajous 24mmx24mm, 60.5mmx60.5mm motion trajectories and a variety of supporting Accessories, can adapt to a variety of test method standards.

Used to test the wear resistance of various coatings, such as floor paint, route board paint, etc. It can also be used to test the wear resistance of Spinning & weaving products, paper, plastic, decorative boards, etc.

In line with DIN-53754, ASTM-D3884 standard, 250g, 500g, 1000g three kinds of load, counter electronic display 6 digits, automatic stop, swirl/spin Rotation speed 60, 70 rpm.

Used for plastic, auto parts, rubber, leather and Spinning & weaving, Eletroplating, lacquer, printing patterns and other products. Meet the standard, stable and accurate operation, LCD touch screen upgrade, simple operation.

Stepping motor parameters 2.5A 21kg cm, load weight actual weight 250/500/750g, load weight marked weight 500/750/1000g, working plate Rotation speed 60/70rpm, abrasive wheels size F51.6 * 12.7mm, abrasive wheels equilibrate weight 1/2/5/10/20g (pin 20g), weight 13kg.

The rolling diameter is 150mm, the lateral displacement of the fixture is 4.2mm/rolling lap, and the load is 2.5N, 5N, 10N. It is used for rubber, tires, conveyor belts, conveyor belts, soles, soft synthetic leather, leather, etc.

Test strip 150 × 20mm, counter LCD display, 0~ 999999, can be done dry, wet friction test.

8 sets of stations, with two Lissajous 24mmx24mm, 60.5mmx60.5mm motion trajectories and a variety of supporting Accessories, can adapt to a variety of test method standards.

The microcomputer system adopts two counting methods, which are intuitive and generous, easy to set, six stations are tested simultaneously, and have automatic technical functions.

The diameter of the scraping needle is 0.45mm, the material meets the requirements of GB/T4358, and the scraping speed is adjustable from 10 to 60 times/minute. When the scraping needle wears through the insulation and contacts the conductor, the machine will automatically stop (self-stop function).

Rotation speed 0~ 70r/min, model chassis φ 100mm × φ 6.2mm (center hole) × 3mm, abrasive wheels size φ 50mm × φ 16mm (center hole) × 13mm, load 500 grams, 750 grams, 1000 grams

Suitable for testing the wear resistance of various coatings, such as floor paint, route board paint, etc. It can also be used to test the wear resistance of Spinning & weaving products, paper, plastic, decorative boards, etc.

Abrasion Tester for testing the abrasion resistance of the caster of the baseplate mass meter, the size of the table is about 800mm, the working disc rotates at 19rpm, the caster rotates at 50rpm, and the load is 90kg.

Coatings, paints and wood wear performance, equipped with wood wear and film wear test two functions, JM-V abrasion instrument speed of 60/70r/min, abrasive wheels size 51.6 × 12.7 mm.