Germany

Germany HTechMT SP200 Digital Roughness Gauge accuracy up to 1um

SE
Germany HTechMT SP200 Digital Roughness Gauge accuracy up to 1um, SP200 Roughness Gauge can evaluate the asperity of sand blasting and shot blasting surfaces
Model：
Contact
Details SPEC CAT
Similar products

HTechMT SP200 Digital Roughness GaugeSPEC

HTechMT SP200 Digital Roughness GaugeDetails

HTechMT SP200 Digital Roughness GaugePacking list

SKU
NB010216
Display mode
digital explicit
Measurement range
0~3000μm(120mils)
Resolution
1μm ( 0.05 mil )
Dimensions
120*56*32mm
Product Weight
160g
packing list
Main unit, Glass, screw driver, Encasement box, Instructions and Certificate
SP200
Digital Roughness Gauge
Germany HTechMT SP200 Digital Roughness Gauge accuracy up to 1um Picture

Introduction

Surface roughness meters are used to accurately measure the peak to surface roughness of sandblasted or shot blasted surfaces. The average value of a series of measurements is the surface roughness of the measured surface. Allows comparison of surfaces during spraying. In addition to evaluating the roughness of sandblasted or shot blasted surfaces, the instrument can also be used to test the depth of pits and grooves caused by corrosion. The instrument has an accuracy of up to 1um. Available in Metric and Imperial systems. Implementation standards: ASTM D4417 and SANS 5772


FAQ
QCan this Digital Roughness Gauge be applied to GB/T6060.5?
A OK
Knowledge
Standard