HTechMT SP310-CM rubbing paper Manual,OI

Related products

LANDTEK SRT-6223 sand blasting shot peening Roughness Gauge printing, lame plating
digital display0 ~ 800µm0.1mm | 1mm

¥2520.0
SE
Roughness Gauge Probes (Sensors) KAIRDA KS120 Small Hole Probe
Small hole probeRoughness of the inner surface of the hole with an aperture greater than 2mm can be measured, the maximum depth is 9mm, and the plane and cylinder can also be measured

SE
TQC SP1562 coating Roughness Gauge
0~3,4mm/0~0.13inch1μm± 5µm / 0.2 mil

¥5170.0
SE
Roughness Gauge Probes (Sensors) KAIRDA KS110 Curved Probe
curved probeCylindrical curved surfaces with a measurement radius greater than 3mm

SE
DUBAN DB20-SRT231 + sand blasting shot peening Surface Roughness Tester
LCD display+/- 5% or +/- 5a0.1 μm (Measured value < 100 μm)

¥2860.0
SE
AMITTARI AR-131A + sand blasting shot peening Roughness Gauge Measurement range 0~750a
Digital display, LCD display0~750μm0.1μm|1μm

¥2550.0
SE
Roughness Gauge Probes (Sensors) KAIRDA KS131 Deep Groove Probe
Deep groove probeIt can measure grooves with a groove width of more than 3mm and a groove depth of less than 10mm; or the surface Roughness of steps with a height of less than 10mm, and can also measure planes and cylinders.

SE
TQC LD2050 surface roughness comparator
25，40，70，10087x87x2.5mm/3.43x3.43x0.1inch60g/212oz

¥2500.0
SE
DUBAN DB22-SRT232 Surface Roughness Tester
GB/T6062,1S04287,DIN4768,JIS B,ANS146.1Ra,RzRa;0.05~10.00μm /1.000~400.OμinchRz:0.020~100.0μm /0.780~4000μinch

¥6864.0
SE
Roughness Gauge measurement platform KAIRDA KA520 swirling/spinning Roughness Gauge measurement platform
Measurement Platform

SE

Recommended for more manual