Germany

German HTechMT AT100-11B adhesion cutter, basic set with 11 * 1 blade

SE
Germany HTechMT AT100-11B adhesion cutter, also known as Cross Hatch Cutter, is suitable for 0-50μm Coating thickness, AT100-11B adhesion cutter has 11 teeth and 1mm tooth spacing.
Model：
Contact
Details SPEC CAT OI
Similar products

HTechMT AT100-11B Adhesion cutterSPEC

HTechMT AT100-11B Adhesion cutterDetails

HTechMT AT100-11B Adhesion cutterPacking list

SKU
NB010239
Number of teeth
11 teeth
Tooth spacing
1mm
Applicable film thickness environment
0~50μm
Cutter head material
stainless steel
AT100-11B
Adhesion cutter
German HTechMT AT100-11B adhesion cutter, basic set with 11 * 1 blade Picture

Introduction

The AT100 adhesion cutter is a simple and easy way to evaluate the adhesion between coatings and substrates. Implementation standards: ISO2409, ASTM D3359

Specifications

Product numberdescribeadhesive tape         coating thickness
AT100-6BThe basic set contains 6*1 blades---  0-60 μm (0-2.4mils)
AT100-6IStandard set contains 6*1 bladesISO  0-60 μm (0-2.4mils)
AT100-6AStandard set contains 6*1 bladesASTM  0-50 μm (0-2.0mils)
AT100-11BThe basic set contains 11*1 blades---  0-50 μm (0-2.0mils)
AT100-11AStandard set contains 11*1 bladeASTM  0-50 μm (0-2.0mils)
AT100-12BBasic set includes 6*2 blades---  0-125 μm (0-5.0mils)
AT100-12IStandard set includes 6*2 bladesISO  0-120 μm (0-5.0mils)
AT100-12AStandard set includes 6*2 bladesASTM  50-125 μm (2.0-5.0mils)
AT100-18BBasic set includes 6*3 blades---  121-250 μm (4.8-9.8mils)

Accessories　

Accessory model  describeAccessory modeldescribe
AT100-6  6*1mm bladeAT100-186*3mm blade
AT100-11  11*1mm bladeAT100-ISOISO tape
AT100-12  6*2mm bladeAT100-ASTMASTM tape
FAQ
QDetermination of water-based interior-wall Coating adhesion, is this cross-cutting knife suitable?
A This model is suitable for the determination of water-based inner and outer wall Coating adhesion in architectural coatings. The cross-cut test is mainly carried out with knives, and the firmness of the Coating to the substrate is judged according to the number of squares of the film peeling. Use a sharp blade and a scale steel ruler to cut 11 cuts with a distance of 1mm in the vertical and horizontal directions of the test plate, and the vertical and horizontal cuts intersect into 100 squares. So it is applicable.
QMeet ASTMD3359 adhesion cutter
A AT100-11B adhesion cutter, please refer to it.
Knowledge
Standard