CNSHP CH1215T-4J Magnetic stirring Thermostatic Bath 120 ℃/15L
SECNSHP CH1215T-4J Magnetic stirring high temperature Thermostatic Bath is a laboratory high temperature Thermostatic Bath with a Temperature range of 15~ 120 ℃ and a volume of 15L. CH1215T-4J Magnetic stirring high temperature Thermostatic Bath is mainly suitable for chemical, rubber, laboratory analysis and other industries.
$1437.00/set
PromotionLoading...
Coupon
Model：
CH1215T-4J
hengping CH1215T-4J Thermostatic Bath with magnetic stirringSPEC
hengping CH1215T-4J Thermostatic Bath with magnetic stirringDetails
hengping CH1215T-4J Thermostatic Bath with magnetic stirringPacking list
- SKU
- NB010335
- Temperature range
- 15~120℃
- Temperature Fluctuation
- ±0.05℃
- Temperature Resolution
- 0.1℃
- Tank Volume
- 15L
- Tank opening Dimensions
- 215*155*205mm
- Temperature control mode
- Microcomputer temperature control, PID adjustment
- Circular mode
- Domestic circulation
- Total Power
- 1700W
CH1215T-4J
Thermostatic Bath with magnetic stirring
Introduction
CH1215t-4j is a see-through Super Constant Temperature Bath with glass on all sides, which is convenient for observing the changes of the tested samples. The four holes are independently magnetically stirred, the speed can be adjusted, and the speed of the four holes can be independently displayed. It is mainly used in chemical industry, rubber, laboratory analysis and other industries.
Features
4 test tubes can be placed at the same time
The temperature of the four holes can be displayed independently
The method of magnetic stirring is used to speed up the temperature transfer of the liquid to be tested to achieve rapid uniformity
Magnetic stirring stepless speed regulation and display speed
FAQ
QDoes the HENGPING Magnetic Stir High Temperature Thermostat meet the standard of GB/T18856.4?
A
The CH1215T-4J Magnetic Stir High Temperature Thermostat can refer to
Knowledge
Standard
- 1JJF 2019-2022《Measurement Specification for Temperature Performance of Liquid Constant Temperature Testing Equipment》
- 2JJF 1030-2023《Measurement and Test Norm of Metrological Characteristics of Thermostatic Baths for Temperature Calibration》
- 3GB/T 28853-2012《Thermostatic baths and circulators - Heated circulators》
- 4GB/T 32710.5-2016《Safety requirements for environmental testing and conditioning equipment—Part 5: Heating baths》
- 5JJF 1030-2010《Measurement and Test Norm of Thermostatic Bath's Metrological Characteristics》
- 6GB/T 26808-2011《Thermostatic baths and circulators - Refrigerated baths》
- 7GB/T 2005-19787《Heat-shrinkable polyolefine films for packaging materials》
- 8GB/T 18856.4-2008《Test methods for coal water slurry, Part 4: Determination of apparent viscosity》
- 9GB/T 5209-1985《Paints and varnishes--Determination of resistance to water--Water immersion method》
- 10GB 9278-2008《Temperature and Humidity of Coating Specimen State Adjustment and Test》