Specifications
| Tooth spacing | 1mm、1.5mm、2mm、3mm |
| cut length | 35mm |
| Number of teeth | 11 teeth |
| application standard | BS3962-6、GB4893.4-85 |
| Gross Weight | 1KG |
| packing size | 250*190*110mm |
| Appearance material | stainless steel |
| material | stainless steel |
| principle | The coating is cut into a lattice pattern and penetrated to the base material by a specific tool, and then the adhesion effect of the coating separation from the substrate is evaluated according to the six-level classification. |
| function | Coatings are tested for film adhesion on surfaces such as plastic, lame plating or Eletroplating products. |
Packing list
1 hundred grid board, 1 magnifying glass, 1 brush, 1 cross-cutting knife, 1 box of blades
After-sales instructions
Warranty days: 365 days
【After-sales service】
1. One year warranty, consumables are not covered by the warranty, the warranty is responsible for the original factory;
2. Man-made damage or damage caused by improper use is not within the scope of free maintenance;
3. If the quality problem identified by the original factory does not affect the secondary sales, you can apply for a refund within 7 days and replace the goods within 15 days. Returns and exchanges due to selection errors will not be accepted, please confirm the specifications, performance parameters and test conditions before purchasing.
[Note] For after-sales services outside the Chinese mainland, if the instrument requires repair, the shipping and possible associated taxes shall be borne by the sender. Generation address of the manual: http://en.nbchao.com/p/10812/Specification.html , which is only used by users who purchase commodities from the NBCHAO.