HUITAI MJ-250-II Mold Incubator for bacteria/mold/microbial foster foster

MJ-250-II

Mold Incubator

Introduction

Huitai MJ-250-II mold IncubatorIt is used in environmental protection, drug testing, agricultural and livestock, aquatic products and other scientific research, colleges and universities, and production departments. It is water body analysis and analysisBOD determination. Bacteria, mold, microgrowthSpecial constant temperature equipment for the cultivation, preservation, plant cultivation and breeding experiments of animals.

Features

1. Standard large-screen LCD display, multi-group data one-screen display, menu-type operation interface, simple and easy to understand, easy to operate.

2. It adopts mirror stainless steel liner with four corners and semi-circular arc design, which is easy to clean and the spacing of the partition in the box is adjustable.

3. The international brand compressor and the self-developed compressor cooling system can effectively prolong the life of the compressor.

4. JAKEL pipe flow circulation fan is used to accompany the unique design of the air duct to create good air circulation and ensure the uniformity of temperature in the box.

5. PID control mode, small fluctuation of temperature control accuracy, with timing function, the maximum time setting value is 99 hours and 59 minutes.

6. The ultraviolet sterilization system is located on the top layer of the box, which can effectively kill the floating bacteria in the circulating air in the box, so as to effectively prevent pollution during cell culture.

7. It has a microcomputer moderate control system to effectively ensure the humidity deviation.

Product display diagram

Matching

1) The diameter of the left side of the box is 25mm/50mm test hole, which is convenient for operation and temperature measurement.

2) Optional door observation window.

3) Intelligent LCD programmable multi-segment controller

4) 15 sections of 30 steps can be preset, and the setting time of each section is 1~99 hours and 59 minutes.

5) Multi-stage programmable control, simplifying the complex experimental process, and truly realizing automatic control and operation.

6) Independent temperature limit alarm system, when the limit temperature is exceeded, the operation will be automatically interrupted, and the sound and light alarm will prompt the operator. Ensure the safe operation of experiments without accidents.

7) Convenient data processing, with USB or RS485 interface, can be connected to a printer or computer, can record the change of temperature parameters.

Packing list：3 shelves, 1 sink, 2 fuses, 1 water tank, 1 transparent hose, manual, certificate of conformity, after-sales commitment

[Note]Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.