YIHENG DZF-6022 Vacuum Oven

DZF-6022

Vacuum Oven

Power supply Voltage for AC220V 50HZ, input Power is 700W. Temperature range is RT + 10~200 ℃, Temperature Fluctuation is only +/- 1 ℃, Temperature resolution reaches 0.1 ℃. Interior size is 300 * 300 * 275mm, stainless steel 304 (1Cr~ 18Ni9Ti) material, shelf standard 2 pieces. Dimension is 605 * 490 * 450mm, equipped with mechanical pointer vacuum meter, vacuum degree can reach 133Pa. Applicable working Environmental temperature is + 5~ 40 ℃.

The new generation of vacuum Drying Oven, based on Yiheng's many years of successful experience in box heating, has overcome the "bottleneck" in the heat conduction process through continuous research, and found a good heat conduction method.

Use overview:

The vacuum Drying Oven is specially designed for drying heat-sensitive, easily decomposed and easily oxidized substances, and can be filled with inert gas inside, especially some items with complex components can also be dried quickly.

Features

● The cuboid studio makes the utilization rate of the effective volume large, and the microcomputer temperature controller ensures accurate and reliable temperature control. Compared with the traditional vacuum box, the drying time is reduced by more than 40%.

● Toughened, bulletproof double-layer glass door to observe the objects in the working room at a glance, and can fill the interior with inert gas.

● The closed tightness of the box door can be adjusted, and the integrally formed synthetic silicon door seal ensures high vacuum inside the box.

● The studio is made of stainless steel plate material to ensure the product is durable and easy to clean.

● Storage, heating, testing and drying can be carried out in an environment without oxygen or filled with inert gas, which will not cause oxidation.

Packing list：Drying oven × 1, trial manual × 1, packing list × 1, warranty × 1, warranty card × 1, fuse × 2, vacuum connecting tube × 1, shelf, wrench × 2

[Note]Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.