LANDTEK HM-934-1 digital display pasteur Hardness Gauge special indentation Hardness Tester for aluminum industry

HM-934-1

Pasteur Hardness Gauge

Suitable for soft aluminum or aluminum alloy; Maximum Hardness value can be recorded; Measured at one pressure, in line with ASTM B648, HD2583, GB/T3854 standards.

Introduction

Lantek HM-934-1 Barcol Hardness Tester is a small and digital indentation Hardness Tester newly developed by Lantek, which mainly determines the Barcol hardness value of the tested sample according to the depth of the indentation. The HM-934-1 Barcol Hardness Tester has a relatively wide measuring range, which is 0~100HBa, which is equivalent to the hardness value range of 25~135HBW. The measurement resolution is 0.1HBa. It is designed for hand-held, easy to measure with one hand, and It can keep recording the maximum value, and the liquid crystal digital display can clearly understand the measured hardness value. The Barcol Hardness Tester is mainly designed for the hardness measurement of the aluminum industry and the glass fiber reinforced plastic industry.

Features

1. HM-934-1 Barcol Hardness Tester is mainly used to measure the Barcol hardness value HBa of materials.

2. Small shape design, light weight, easy to operate with one hand, and can measure the hardness value of the tested sample with one pressure, without any training, suitable for any occasion.

3. Wide range of hardness measurement. It can test relatively soft pure aluminum to very hard aluminum alloys.

4. HM-934-1 Barcol Hardness Tester can be used to test large and thick workpieces or assemblies without support.

5. Able to record the maximum hardness value during the measurement period.

Application

HM-934-1 Barcol Hardness Tester is suitable for measuring pure aluminum, soft aluminum alloy, thick aluminum alloy, aluminum strip, aluminum profile, aluminum rod, aluminum casting, aluminum forging and aluminum alloy products, that is, aluminum processing industry Special Barcol Hardness Tester can also be used in FRP industry.

Standards

HM-934-1 Barcol Hardness Tester complies with ASTM B648-00 "Test method for measuring the hardness of aluminum alloy by Barcol Hardness Tester", ASTM HD2583-07 "Test method for measuring the indentation hardness of hard plastic by Barcol Hardness Tester" and GB/ T 3854-2005 "Barcol Hardness Test Method for Reinforced Plastics".

Pictures

Packing list：Host x1, spare pressure needle x2, standard Hardness block x1, reference piece x1, small screw driver x1, small wrench x1, portable case x1, manual x1

[Note]Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.