YIHENG LRH-70F Biochemical Incubator

LRH-70F

Biochemical Incubator

Temperature range 0~60 ℃, Temperature resolution 0.1 ℃, Temperature fluctuation High temperature +/- 0.5 ℃, Low temperature +/- 1.0 ℃, Temperature uniformity +/- 1.5 ℃ (25 ℃), humidity control range No, humidity deviation No, Operating Environment temperature + 5~ 30 ℃, input power 450W

Complying with the world's environmental protection trend, international brand compressors and circulating fans are effective and low in energy consumption, which not only promote energy saving, but also have a long service life, which can reduce noise to a lower limit. Compared with traditional low-temperature equipment, the cooling time is reduced by more than 40%.

Use overview:

It is suitable for scientific research, colleges and production departments such as environmental protection, sanitation and epidemic prevention, drug inspection, agriculture and livestock, and aquatic products. It is a special constant temperature equipment for water body analysis and BOD determination, bacteria, mold, microorganism culture, preservation, plant cultivation and breeding test.

Features

● Mirror-finished stainless steel liner, semi-circular design at four corners, easy to clean, adjustable shelf spacing.

● International brand compressors, using environmentally friendly refrigerants (R134a), are effective, low energy consumption, and promote energy saving.

● Microcomputer PID temperature controller, accurate and reliable temperature control, less fluctuation, with timing function.

● The circulating fan speed is controlled by three gears, which avoids volatilization of samples due to excessive air volume during the test.

● Equipped with an independent temperature limit alarm system, it will be automatically interrupted when the temperature exceeds the limit, so as to ensure the safe operation of the experiment without accidents. (optional)

● With a printer or RS485 interface, it can be connected to a printer and a computer, and can record changes in temperature parameters. (optional)

● LCD display, menu operation. (Model with "F" has this function)

Optional parts: (increase the delivery time of optional parts by 7 days)

1. Multi-segment programmable temperature controller (biochemical, mold type I) /  multi-segment programmable temperature and humidity controller (mold type II)

2. Embedded printer

3. Paperless Recorder

4. Independent temperature limit controller

5. The test hole with a diameter of 25mm on the left side (50mm above 500 liters)

6. BOD socket

7. RS485/232 interface and communication software

Note: Choose one of RS485/232 and printer

Packing list： host x1, instruction manual x1, packing list x1, warranty x1, warranty card x1, daylight tube x1, shelf x2, shelf x3, water plate x1, printing paper x1, CD x1,

[Note]Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.