LANDTEK SRT-6100 Surface Roughometer 10μm stylus measurement Ra and Rz values

SRT-6100

Roughness Gauge

Inductance type; measurement of Ra and Rz values, accuracy ≤ +/- 15%; built-in Sensors; stylus 10μm; conforms to GB/T6062 standard; with RS232 interface.

Introduction

LANDTEK SRT-6100 roughness meter , also known as surface finish meter or surface roughness meter, is a special testing instrument for detecting the surface roughness of objects. It uses the needle drawing method to measure the roughness of objects. , can measure the Ra and Rz values of the roughness at the same time. SRT-6100 roughness meter is a built-in high-precision sensor type, small in size, easy to carry, in line with international standards GB/T6062 and ISO, DIN, ANSI and JIS various international standards, digital display, clear and intuitive display of measurement data.

Product principle

The SRT-6100 roughness meter is to place the sensor on the measured surface of the workpiece, and the internal driving mechanism of the roughness meter drives the sensor to slide along the measured surface at a constant speed. The sensor feels the roughness of the measured surface through the built-in stylus. The roughness of the measured surface of the workpiece causes the displacement of the stylus, which will change the inductance of the inductance coil of the sensor of the SRT-6100 roughness meter, so that a column proportional to the measured surface roughness is generated at the output of the phase-sensitive rectifier. The analog signal enters the data acquisition system after amplification and level conversion. The DSP chip performs digital filtering and parameter calculation on the collected data, and the measurement results are displayed on the LCD. At the same time, it can communicate with the PC to realize data analysis and Print.

Features

1. SRT-6100 roughness meter can measure Ra and Rz values at the same time.

2. Adopt high-precision inductive sensor

3. It has the functions of automatic shutdown and conversion between metric and imperial systems.

4. The roughness meter can be connected to PC to transmit data through USB and RS-232 data line output.

5. Bluetooth data transmission.

Applications

SRT-6100 roughness meter is suitable for measuring the surface roughness of machined parts at the production site.

Pictures

Packing list：Host x1, small screw driver x1, standard sample SSP-180x1, standard Sensors SRP-100x1, portable case x1, manual x1

[Note]Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.