LANDTEK SRT-6223 sand blasting shot peening Roughness Gauge printing, lame plating

SRT-6223

Roughness Gauge

Dedicated to sand blasting shot peening, printing, lame plating anti-corrosion test; integrated structure; range 0~800μm; accuracy +/- 5%; with RS232 interface; can be purchased separately USB and Bluetooth data output.

Introduction

LANDTEK SRT-6223 Sandblasting and Shot Peening Roughness Meter is an integrated surface roughness meter with built-in sensor, which is small in size and easy to carry. SRT-6223 Sand Blasting and Shot Peening Roughness Tester is designed and produced according to ASTM D4417 method C and NACERP0287-95 standard method. It can directly measure the peak-valley height of the surface, and can be connected to a PC for data transmission and analysis of printed data. The measurement range of SRT-6223 roughness meter is 0~800 microns, the measurement accuracy is ±5% or 5 μm, and it uses the inductive principle for measurement.

Application

SRT-6223 Sandblasting and Shot Peening Roughness Meter is suitable for the surface roughness requirements of shot blasting industry, printing industry, spraying and anticorrosion industry, etc.

Features and advantages

1. SRT-6223 sandblasting and shot peening roughness meter has a built-in high precision inductive sensor.

2. It has the functions of average value calculation, automatic shutdown, metric and imperial conversion, etc.

3. It can be connected to PC through USB data cable and RS-232 data cable to transmit data and output data through Bluetooth.

4. The roughness meter has a blue backlit LCD display.

Pictures

Packing list：host x1, portable box x1, manual x1.

[Note]Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.