LEICI DZS-708C STIP-scan detection of conductivity/dissolved oxygen concentration/temperature value

DZS-708C (Conductivity detector, dissolved oxygen, ℃)

Multiparameter Water Quality Analyzer

Introduction

Thunder Magnetic DZS-708C water quality Detector belongs to DZS-708 series Detector, using 5.7 inch large LCD screen, full Chinese design, easy to operate, can be measured through three different measurement modes, suitable for different experimental environmental conditions.DZS-708C water quality Detector can measure conductivity, resistivity, TDS, salinity, dissolved oxygen concentration value, temperature value and saturation value at the same time, with a communication interface can be connected to PC equipment to manage printing data, convenient data analysis.

Features

1. 5.7 inch large LCD touch screen, full Chinese design, very convenient operation.

2、DZS-708C water quality Tester canSimultaneous measurement displayConductivity, resistivity, TDS, salinity, dissolved oxygen concentration, temperature and saturation values.

3. Realize zero oxygen calibration and full calibration.

4. Powerful data management functions, including data viewing, printing, deletion and other functions. You can query the parameters used in the current measurement mode and the previous calibration data.

5. The measurement data conforms to GLP specifications, and up to 2200 sets of measurement data can be stored.

6. There are three different measurement modes: continuous measurement mode, timing measurement mode and balance measurement mode.

Introduction to the functions of the module

1. Conductivity measurement module function

1）DZS-708C water quality TesterIt supports the measurement of conductivity, resistivity, TDS, and salinity.

2) Automatic calibration, automatic range switching, can calibrate the cell constant or TDS conversion coefficient

2. Dissolved oxygen measurement module function

DZS-708C water quality TesterIt has the functions of automatic zero oxygen calibration and full calibration, and can realize two calibration methods: air pressure calibration and salinity calibration.

Introduction

Packing list：

[Note]Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.