JIECHENG HH-8 Digital Display Single Row Water bath 8 holes
HH-8
-
DADI HH-S28 digital display double row eight hole thermostatic water bath ABS lid$ 176.00SE -
HUITAI HWS-26 Thermostatic Water Bath double row 6 holes$ 223.00SE -
DADI HH-S28 digital display double row eight hole thermostatic water bath$ 203.00SE -
BOZHEN HH-8 Electric Thermostatic Water Bath double row eight holes$ 277.00SE -
Guohua HH-8 digital display constant temperature Water Bath pot 8 holes$ 254.00SE
JieCheng HH-8 Digital display Water BathSPEC
JieCheng HH-8 Digital display Water BathDetails
JieCheng HH-8 Digital display Water BathPacking list
- SKU
- NB011941
- Temperature range
- RT+3~100℃
- Temperature Fluctuation
- ±0.1℃
- Temperature Resolution
- 0.1℃
- Tank Volume
- 13L
- Total Power
- 2000W
- Power supply Voltage
- AC 220V 50Hz
- Display mode
- LED
- Environmental temperature
- 5~40℃
- number of holes
- Eight-hole single row
- Tank Size
- 1200*180*130mm
Introduction
Jiecheng HH-8 digital display single row Water Bath is suitable for laboratories and laboratories of ** units, universities, scientific research, chemical printing and dyeing enterprises and institutions, and is used for distillation, drying, concentration and constant temperature heating of chemical samples and biological products.
Characteristics:
1. The inner tank is made of 304 stainless steel, which does not rust.
2. Intelligent controller, good temperature control effect, a large number of exports to European countries.
3. The temperature parameters are displayed on one digital screen.
4.It is made of stainless steel, and the outside of the box is made of good steel plate, which is beautiful and novel.
5.The large LED screen display shows the measured temperature.
6.The electric heating pipe is made of U-shaped steel pipe, sintered magnesium oxide and heating wire, which is directly immersed in water and has less heat loss.
Introduction to controls
★ The microcomputer P.I.D. temperature controller with over-temperature deviation protection and digital display is adopted, with timing function, and the temperature control is accurate and reliable.
★ Incoming call recovery, parameter encryption, temperature correction and other functions.
★ With the function of power-off recovery, the equipment can automatically resume operation according to the original program after the external power supply suddenly loses power and the power comes again.
Security settings
★ Thoughtful safety protection design realizes triple safety protection for personnel, samples and equipment
★ Safety functions: sensor fault alarm, over-current trip protection, etc
Pictures
- 1Determination of organic carbon content in different organs of rubber tree by oven heating method
- 2What are the types of commonly used laboratory equipment?
- 3Viscosity by falling ball method
- 4How to determine the lacquer acid value for Paints and varnishes?
- 5How to assemble and use Thermostat
- 6Technical knowledge of Ulabo bath temperature control
- 7Synthesis of Polyvinyl Acetate Coatings
- 8Thermostat structure and working principle introduction
- 9Precautions for the operation of electric heating constant temperature Water Bath
- 10Study on calibrating method of Coating viscometer
张蔚滨 - 《沈阳计量测试院》
- 1SL 144.6-2008《Calibration method of constant temperature water-bath》
- 2JJF (新)08-2017《Calibration Specification for Electrically-heated Thermostatic Water Bath》
- 3GB/T 18856.4-2008《Test methods for coal water slurry, Part 4: Determination of apparent viscosity》
- 4GB/T 5561-2012《Surface active agents - Determination of viscosity and flow properties using a rotational viscometer》